View Single Post
Old 17 June 2015, 10:57   #151
Registered User
Join Date: Sep 2008
Location: Paris / France
Posts: 504
Originally Posted by danko View Post
Another game with disk change signal timing problem,tested other versions all have the same issue,have a latest hxc firmware flashed.

Risky Woods (1992)(Electronic Arts)[cr TRSi][t +4 Supplex](Disk 1 of 2)
Risky Woods (1992)(Electronic Arts)[cr TRSi][t +4 Supplex](Disk 2 of 2)

Yes there is an IO timing issue with these games, and correct this by software correction will probably be hard.

Anyway there is a workaround for Agony and Risky Woods : Add a jumper on the MO jumper (So you will have S0 + MO).

The drawback of this solution is that you can't have other drive on the floppy bus.

(FYI the good old SD HxC don't have any issue with these game ).

BTW There is an firmware update :

17 June 2015: Firmware USB HxCFloppyEmulator v3.0.4.0a

	- I2C LCD auto detection/scan and communication improved/corrected

	- Low level pulses generator improved :
		- Code size reduced.
		- 250Kbits/s, 300Kbits/s, 500Kbits/s support (FM/MFM).
		- Variable bitrate & flakey bit support "Ready" ;)
Jeff_HxC2001 is offline  
Page generated in 0.03968 seconds with 10 queries