View Single Post
Old 03 June 2015, 13:00   #7
modrobert
old bearded fool

modrobert's Avatar
 
Join Date: Jan 2010
Location: Bangkok
Age: 50
Posts: 384
Yes, install the prism2v2 driver again.

Skip WEP, and use WPA TKIP/PSK only, avoid any router setting which allows both WPA and WPA2 for example, that failed for me (handshake fail, read my post linked previously for info how to get debug output from the prism2v2 driver).

Try this wireless.prefs (change as needed; ssid, psk pass).

Code:
network={
        ssid="myrouter"
        scan_ssid=1
        psk="foofoo"
}
Then the prism2v2 driver will replace "foofoo" (the WiFi password) with a hex string after the first (slow) run and save it to wireless.prefs.

AFAIK, the only way to utilize the Orinoco Silver (PC24E-H-FC) hardware encryption/decryption to offload the A1200 is to configure the router for WPA with TKIP/PSK, otherwise it will be done by CPU using the driver software (or just fail).

Last edited by modrobert; 03 June 2015 at 13:23. Reason: Addes wireless.prefs.
modrobert is offline  
 
Page generated in 0.05802 seconds with 9 queries