View Single Post
Old 03 June 2015, 10:08   #5
modrobert
old bearded fool

modrobert's Avatar
 
Join Date: Jan 2010
Location: Bangkok
Age: 50
Posts: 384
Quote:
Originally Posted by jools_ View Post
It also says this in amitcp log window:

[ err ] : S2_CONFIGINTERFACE: Inappropriate state (Attempt to config twice)
I get that when using prism2v2 and AmiTCP 3.0b2 as well, silly window opens, works fine anyway.

Do you have a default gateway configured in AmiTCP?

This installation guide is pretty good:
http://www.wiwi.uni-frankfurt.de/~an...itcp/index.htm


I have the same PCMCIA hardware, and helped another EAB user here, perhaps it can help you:

http://eab.abime.net/showpost.php?p=969813&postcount=6

When testing, keep in mind that the first time you run it prism2v2 it can take several minutes on a standard A1200 to generate the WiFi (password) key from clear text, this is only needed once, after that the key will be a hex string and load fast. However, if you keep rebooting the Amiga thinking it failed prism2v2 will never have time to complete the WiFi auth.

Last edited by modrobert; 03 June 2015 at 10:16.
modrobert is offline  
 
Page generated in 0.04810 seconds with 9 queries