View Single Post
Old 14 May 2015, 01:54   #1
Boltar
Registered User

 
Join Date: Dec 2014
Location: UK
Posts: 18
Amiga Floppy Question

Hi All This may be a daft question, but me and a friend were just talking about ways to get some of his Amiga floppies onto the PC. I know there are solutions around like CatWeasel and the like, but we were speculating if it may be possible to use an Arduino to translate the signals. Essentially, if it were somehow possible to grab from WinUAE, the actual logic states of the output pins on the floppy hardware interface, this information could be sent to the Arduino over USB which could then set the relevant states on a physical drive which was wired up to the IO ports on the Arduino, it would also read the input pins and transmit this information back to WinUAE which should essentially allow WinUAE to work with a physical drive. Viable or not do you think? Cheers Bolt
Boltar is offline  
AdSense AdSense  
 
Page generated in 0.05717 seconds with 9 queries