View Single Post
Old 13 May 2015, 12:28   #14
Registered User
ajk's Avatar
Join Date: May 2010
Location: Helsinki, Finland
Posts: 1,031
You wouldn't be using the RF feature of the A520 for anything. You would use its capability to create a colour composite signal.

As far as I know the 1084S only accepts RGB, so you could not use it in this setup. You'd need another display that accepts composite. If there are variants of the 1084 that accept composite, then it's fine of course. I don't have one myself.

So, the colour composite from the A520 would go to a recording device, and the monochrome composite directly from the A500 would go to the display device so you can see what you are playing. Or you can split the colour signal both ways using a simple y-cable, but doing so will reduce image quality by some degree.
ajk is online now  
Page generated in 0.14921 seconds with 9 queries