View Single Post
Old 27 April 2015, 12:21   #4
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 42
Posts: 19,561
Quote:
Some values look familiar from the copperlist. But what does COP 08C mean?
Check HRM for register 08C description

First "slot":

COP = access type.
08C = custom register accessed
Number below is value written/read (0180)
Larger number below is address of access (in this case copper list pointer, 0002DE74)
Final number is UAE internal cycle counter (D60BB800)

Copper move cycle: (0180 0414)

Load first word to $08c. (0002DE74: 0180)
Load second word to custom register loaded in first word. (0002DE76: Write $414 to $dff180)

Use "od" command to enable "o" copper list command vertical/horizontal values. It will help to match "v" and "o" commands.
Toni Wilen is online now  
 
Page generated in 0.04927 seconds with 9 queries