View Single Post
Old 23 April 2015, 18:08   #1
Registered User
Join Date: Aug 2004
Posts: 2,828
Resolution autoswitch doesn't work reliably

it seems that resolution autoswitch (including VGA mode res autoswitch) doesn't always detect resolution changes.

Specifically, with Workbench set to 1024768 HighGFX mode, on viewing a 640512 (PAL) image using MultiView the resolution sometimes doesn't change from superhires (needed for WB) to hires.

If you bring Workbench to the front and send it to the back several times, you should see that sometimes the resolution change is detected, sometimes it isn't.

Bootable disk with example image attached. Boot using an ECS config with resolution autoswitch enabled, window size at least ~1080x800.
Attached Files
File Type: zip (315.1 KB, 48 views)
mark_k is offline  
AdSense AdSense  
Page generated in 0.10563 seconds with 10 queries