View Single Post
Old 19 March 2015, 21:26   #138
mark_k
Registered User
 
Join Date: Aug 2004
Location:
Posts: 2,481
I've been using my usual config with HDF on GVP Series I controller ID#0. That works fine.

I added a CD-ROM drive on ID#2 and selected a .cue file for the CDPD#2 disc. On booting there are a lot of accesses to the CD drive, and eventually I get the purple insert disk screen; the system doesn't boot from hard disk as it should. The same thing happens if there is no CD in the drive. (On my real A2000 with GVP Series II controller there is no problem having a CD-ROM drive connected as ID 2.)

I noticed that the GVP ROM (v3.15) seems to issue a MODE SENSE command for page $00:
CD SCSIEMU 0: 1A.00.00.00.04.00.00.00.00.00.00.00 CMDLEN=6 DATA=0677F5A8 LEN=4
CD SCSIEMU MODE SENSE PC=0 CODE=0 DBD=0
CD SCSIEMU REPLY: 0F.00.00.08.


What is page 0? It's listed as vendor-specific in the SCSI spec.
Attached Files
File Type: zip GVP_SI_CD_configs.zip (6.6 KB, 39 views)
mark_k is offline  
 
Page generated in 0.06574 seconds with 10 queries