View Single Post
Old 06 February 2015, 19:52   #4
jonssonj
Registered User

 
Join Date: Jan 2015
Location: Bjärred
Posts: 20
So, A1200 mainboard IDE only, is it the one called "IDE (Auto)"? Because I can't find anything named A1200 in the controller list when creating the hardfile.

Anyway, it seemed to work with IDE (Auto), I could add the SFS/02 filesystem, partition the disk, format the disk and install the OS4.1 without any problems. When rebooting I get a requester from "Smart File System" that says:


================================
Device DH0: (scsi.device, unit 0)

There was an error while accessing this volume:

General device failure.
The disk is in an unreadable format.

errorcode = 20
io_Command=2
io_Offset=1887428608
io_Length=8192
io_Actual=0
==============================

First I thought that maybe the IDE on the A1200, could'nt handle the 3,6GB size, so I tried one more time with only 1,6GB System disk, but with the same result.

Does the SFS/02 work on A1200 IDE controller? or should I try some other filesystem? Or did I choose the wrong harddrive controller ( IDE (Auto) )?

Here is my config and log files from WinUAE.
winuae_debug.zip

BR
Jörgen Jönsson
jonssonj is offline  
 
Page generated in 0.08950 seconds with 10 queries