English Amiga Board


Go Back   English Amiga Board > Search Forums

Showing results 1 to 40 of 291
Search took 0.04 seconds.
Search: Posts Made By: dalek
Forum: support.Hardware 17 October 2019, 06:16
Replies: 22
Views: 562
Posted By dalek
Ahh okay that's a bit different then - probably...

Ahh okay that's a bit different then - probably the issue mentioned by terriblefire that the 2091 scsi driver is requesting any type of RAM for buffers and getting allocated 32bit non-DMA'able RAM...
Forum: support.Hardware 15 October 2019, 04:10
Replies: 9
Views: 372
Posted By dalek
In the photo, that pin strip doesn't even look...

In the photo, that pin strip doesn't even look like it is sitting flush against the PCB, and some pins not even soldered???
Forum: support.Hardware 15 October 2019, 04:07
Replies: 22
Views: 562
Posted By dalek
Are you trying to use the IDE interface on the...

Are you trying to use the IDE interface on the A2091 with a CF card? If so it won't work:

(from here (http://www.wonkity.com/~wblock/a4000hard/a2091ref.html)

Or if is the IDE interface on a...
Forum: Retrogaming General Discussion 15 October 2019, 03:53
Replies: 43
Views: 1,356
Posted By dalek
Stuck in legal limbo

Stuck in legal limbo
Forum: Amiga scene 14 October 2019, 14:04
Replies: 30
Views: 1,139
Posted By dalek
Hey, I like your project - it's cool. I think it...

Hey, I like your project - it's cool. I think it will work way better than a generic PC keyboard. Definitely nicer than stickers :)

As for all the moaning about the HELP key, that's no worries...
Forum: support.Hardware 24 September 2019, 10:35
Replies: 27
Views: 995
Posted By dalek
Using the same CF card + adapter + cable + image...

Using the same CF card + adapter + cable + image (yep, pfs3, updated scsi.device and correct maxtransfer) that hangs on my TF328, works just fine on my TF330..... I'm guessing as you say a spinning...
Forum: support.Hardware 24 September 2019, 05:56
Replies: 27
Views: 995
Posted By dalek
I've found that replacing the CF card adapter on...

I've found that replacing the CF card adapter on the TF328 with an SD2IDE adapter and SD card fixed the majority of hangs I was having with mine...

Frontier WHDLoad was reproducable 100% of the...
Forum: support.Hardware 11 September 2019, 06:08
Replies: 16
Views: 484
Posted By dalek
Do you have anything plugged in to to the PCMCIA...

Do you have anything plugged in to to the PCMCIA card slot?
Forum: Retrogaming General Discussion 11 September 2019, 01:14
Replies: 15
Views: 692
Posted By dalek
I really enjoy playing megadrive games on my wii....

I really enjoy playing megadrive games on my wii. Install homebrew and the emulators, you won't regret it! Using the wii classic controllers is a nice touch too, but wiimotes work fine.

Over...
Forum: support.Hardware 03 September 2019, 06:47
Replies: 23
Views: 1,451
Posted By dalek
Take a look at "SMD" battery holders - should be...

Take a look at "SMD" battery holders - should be much lower profile - with the battery sitting directly on the PCB. Then just throw some insulation over the top of it. Something like this...
Forum: support.Hardware 02 September 2019, 02:35
Replies: 16
Views: 627
Posted By dalek
Understand wanting to do your own thing, but in...

Understand wanting to do your own thing, but in case you haven't seen it a good starting point is: http://aminet.net/package/docs/hard/appe_v32
Forum: Hardware mods 29 August 2019, 02:39
Replies: 11
Views: 1,037
Posted By dalek
Looks neat! Those terminal sockets you used...

Looks neat!

Those terminal sockets you used for the wires to the PSU DC-out posts - do you have a source for them? I'd like some but don't even know what they're called to google for them. They...
Forum: support.Hardware 25 August 2019, 08:22
Replies: 15
Views: 542
Posted By dalek
Great advice from Vyper for the repairs, but to...

Great advice from Vyper for the repairs, but to add, if you are a "complete noob around the whole electronics side of things" then please practice soldering/desoldering on something expendable like...
Forum: support.Hardware 22 August 2019, 15:45
Replies: 29
Views: 1,276
Posted By dalek
As you say the TF534 is no longer supported (and...

As you say the TF534 is no longer supported (and was reluctantly released) so you'll have to be happy with best effort advice from the community. If you were banned I guess there would be a reason. ...
Forum: support.Hardware 20 August 2019, 02:19
Replies: 58
Views: 3,982
Posted By dalek
Nice work. As a "one day" project I was...

Nice work.

As a "one day" project I was thinking of a dual mount for a gotek + scsi2sd in a single 3.5" bay - I haven't measured it but I think it might fit. Hopefully someone beats me to it :)
Forum: support.Hardware 19 August 2019, 02:17
Replies: 2
Views: 156
Posted By dalek
The PALs are different for the different...

The PALs are different for the different frequencies that were shipped.

See here: http://relay.pp.fi/Amiga/A2000/GVP%20A3000-030%20COMBO%20REV%203/GVP%20A2000-030%20COMBO.html

On facebook...
Forum: News 01 August 2019, 11:02
Replies: 115
Views: 11,825
Posted By dalek
Technically nice, though unfortunately shaped...

Technically nice, though unfortunately shaped :laughing
Forum: Retrogaming General Discussion 01 August 2019, 05:50
Replies: 24
Views: 1,157
Posted By dalek
Look for eXoDOS - e.g....

Look for eXoDOS - e.g. https://archive.org/details/eXoDOS_Collection_v2.0
Forum: support.Hardware 23 July 2019, 09:34
Replies: 23
Views: 892
Posted By dalek
You should look up the datasheet for the PSU and...

You should look up the datasheet for the PSU and check the minimum current loadings for each rail (esp. 12V, 5V, 3.3V). If there is a minimum specified you need to ensure you have a load that will...
Forum: support.Hardware 11 July 2019, 10:32
Replies: 20
Views: 716
Posted By dalek
Looks like a third party/homebrew card, not an...

Looks like a third party/homebrew card, not an official Commodore one.
Forum: support.Hardware 03 July 2019, 06:01
Replies: 12
Views: 570
Posted By dalek
Cheap and quick:...

Cheap and quick: https://github.com/keirf/PCB-Projects/wiki/Kickstart-Switcher-v2
Forum: support.Hardware 03 July 2019, 05:59
Replies: 13
Views: 427
Posted By dalek
Google 'conformal coating' and use the right...

Google 'conformal coating' and use the right product for the job :great
Forum: support.Hardware 26 June 2019, 08:45
Replies: 27
Views: 995
Posted By dalek
If you use the https://hstwb.firstrealize.com/...

If you use the https://hstwb.firstrealize.com/ hstwb installer it sets up the correct maxtransfer etc automatically. Just use the 4GB CF card image.
Forum: support.Hardware 22 June 2019, 17:31
Replies: 14
Views: 567
Posted By dalek
I did some testing with the TF530 and GVP A500...

I did some testing with the TF530 and GVP A500 HD+. It was mixed results and I can't recommend it - with the older GVP 3.7 rom I could kind of get the HD going but not with the latest 4.15. RAM...
Forum: support.Hardware 21 June 2019, 06:29
Replies: 4
Views: 197
Posted By dalek
Sounds like your RGB to VGA adapter is not...

Sounds like your RGB to VGA adapter is not buffered (it's straight through) meaning the A2000 thinks a genlock is configured.

Easiest fix is to get a buffered VGA adapter.
Forum: support.Hardware 14 June 2019, 01:49
Replies: 14
Views: 567
Posted By dalek
The GVP should work with the TF534 and if you...

The GVP should work with the TF534 and if you remove the RAM on it, with the TF530. If I get a chance on the weekend I'll test both of these options as I have the hardware.
Forum: support.WinUAE 07 June 2019, 05:00
Replies: 9
Views: 1,448
Posted By dalek
For day to day use I use Keir's AmigaTestKit...

For day to day use I use Keir's AmigaTestKit checker. The best (most comprehensive) to me seems to be the MBRTest-2 that's on the Microbotics disk - which you can get here:...
Forum: Hardware mods 04 June 2019, 01:07
Replies: 6
Views: 934
Posted By dalek
Routing is much nicer on yours, thanks! When...

Routing is much nicer on yours, thanks!

When I first started on this while all the info was out there, there were no gerbers that I could actually get. That's well and truly fixed now :)
Forum: MarketPlace 03 June 2019, 03:48
Replies: 56
Views: 3,979
Posted By dalek
I usually report these listings for copyright...

I usually report these listings for copyright violations - there is a category when reporting for duplicates / non-original media which is against ebay rules.

Sometimes it works, sometimes it...
Forum: support.Hardware 23 May 2019, 13:43
Replies: 18
Views: 571
Posted By dalek
Only things you miss out with there are the -5V...

Only things you miss out with there are the -5V line (used by some zorro expansions?) and the tick signal (if you don't want to use the video signal tick jumper option).
Forum: support.Hardware 23 May 2019, 01:28
Replies: 18
Views: 571
Posted By dalek
Nice guide - great writeup. I did the same...

Nice guide - great writeup.

I did the same but stupidly didn't take any pictures. What I did was put the adaptor inside the PSU case - drilled holes in the left hand side - if you look at your...
Forum: support.Hardware 17 May 2019, 08:11
Replies: 18
Views: 571
Posted By dalek
Yeah, there are a few different "innards" as the...

Yeah, there are a few different "innards" as the PSUs were made by different no-name suppliers - I wouldn't trust any single cap kit I found anyway.

But, when I looked at the cost of properly...
Forum: Hardware mods 15 May 2019, 15:10
Replies: 6
Views: 934
Posted By dalek
A572 clone (2MB RAM for A570 CD-ROM)

I've copied the schematics in to KiCAD and produced and tested some boards for the A570 2MB RAM expansion (since I struggled to get hold of one, and there were no gerbers around the place).


...
Forum: request.Other 11 May 2019, 01:56
Replies: 4
Views: 1,937
Posted By dalek
http://grandis.nu/eabsearch/search.php?_search_=1&...

http://grandis.nu/eabsearch/search.php?_search_=1&search=AT+BUS2008+Clone+zip&category_id=&exclude=&limit=
Forum: Hardware mods 02 May 2019, 13:59
Replies: 5
Views: 714
Posted By dalek
Using an NEC 1970nxp the image is good and clean...

Using an NEC 1970nxp the image is good and clean for me (after fiddling with pixel clocks anyway).

I must admit I haven't tested many monitors / configs. I've seen cables made which allow to swap...
Forum: project.EAB File Server 02 May 2019, 13:52
Replies: 2
Views: 809
Posted By dalek
You can use rclone to sync the archive from...

You can use rclone to sync the archive from google drive. That's how they back up the ftp site there in the first place.
Forum: Hardware mods 02 May 2019, 01:53
Replies: 5
Views: 714
Posted By dalek
Nice - it's great you open source all you stuff...

Nice - it's great you open source all you stuff :)

As an alternative, I'd done one that uses solder cups DB23 connectors - just another clone of the commodore one:
...
Forum: Hardware mods 29 March 2019, 00:45
Replies: 23
Views: 2,094
Posted By dalek
Nice work! I did some reading and it looks...

Nice work!

I did some reading and it looks like the TL866 won't program Atmel GALs, only Lattice GALs. The reason is explained here: http://www.bhabbott.net.nz/atfblast.html
Forum: support.Hardware 26 March 2019, 11:21
Replies: 4
Views: 304
Posted By dalek
It's junk - I bought 2 of those from China - one...

It's junk - I bought 2 of those from China - one went pop, the other wasn't powerful enough (CDs would read intermittently - fixed when moving to a stronger power supply).

I think they are...
Forum: Hardware mods 26 March 2019, 01:20
Replies: 23
Views: 2,094
Posted By dalek
Interesting - must be how John's programmer reads...

Interesting - must be how John's programmer reads back the file. jedrevenge works on the one from amigawiki - which matches more or less the haynie one you have.

62569
Showing results 1 to 40 of 291

 
Forum Jump

All times are GMT +2. The time now is 18:55.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Page generated in 0.12948 seconds with 10 queries