English Amiga Board


Go Back   English Amiga Board > Search Forums

Showing results 1 to 23 of 23
Search took 0.01 seconds.
Search: Posts Made By: patzik
Forum: support.Hardware 12 February 2020, 00:15
Replies: 8
Views: 385
Posted By patzik
They both have the same kickstart version, and to...

They both have the same kickstart version, and to be sure I swapped the kickstart ic's and this made no difference...
Forum: support.Hardware 11 February 2020, 00:54
Replies: 8
Views: 385
Posted By patzik
Well, made a little progress, but still can't get...

Well, made a little progress, but still can't get it to work.

The amiga 600's are a 1.1 and a 1.3 revision.

1.1 both the sd adapter and the cf adapter work fine.
1.3 the sd adapter works fine,...
Forum: support.Hardware 21 January 2020, 17:16
Replies: 8
Views: 385
Posted By patzik
If I remember correctly they are a 1.3 and a 1.1...

If I remember correctly they are a 1.3 and a 1.1 revision, I'll look that up.
I used diagrom on the A600 and it does recognise the CF2IDE so that would suggest the amiga is not recognising the...
Forum: support.Hardware 21 January 2020, 13:36
Replies: 8
Views: 385
Posted By patzik
CF IDE works on one A600 but not on another

I am trying to get an A600 working with a CF to IDE adapter but somehow it's not found, when I hold both mouse buttons the partitions are not shown.

Now the strange thing is, this adapter works...
Forum: Hardware mods 23 February 2019, 02:00
Replies: 518
Views: 123,483
Posted By patzik
I made a new version, only thing changed is the...

I made a new version, only thing changed is the added mouse bites for easier separation of the boards, could you please check these gerbers?
Forum: support.Hardware 22 February 2019, 20:03
Replies: 4
Views: 385
Posted By patzik
I received a private msg about this, it was...

I received a private msg about this, it was indeed related to the reset circuit.

Quote"It is necessary to replace the SMD capacitor C612 10uF.
If the old capacitor reset is too long..."

This...
Forum: support.Hardware 13 February 2019, 14:32
Replies: 4
Views: 385
Posted By patzik
Need help with furia

I have a furia020 installed in one a600 and it works fine, 8mb fast ram.
Now I want to install this in another a600 in which I installed 2 extra ram chips (piggyback method) so this one has 2mb...
Forum: Hardware mods 26 January 2019, 14:34
Replies: 518
Views: 123,483
Posted By patzik
Hi Pete, glad you checked the things I did. I did...

Hi Pete, glad you checked the things I did. I did this not because I think it's 'better' but because it was requested. Personally I prefer solder jumpers, and not preconfigured as I don't like...
Forum: Hardware mods 25 January 2019, 11:31
Replies: 518
Views: 123,483
Posted By patzik
Latest Gerbers

Latest Gerbers
Forum: Hardware mods 25 January 2019, 09:49
Replies: 518
Views: 123,483
Posted By patzik
I downloaded the file again, and it works fine...

I downloaded the file again, and it works fine for me in eagle 9.2.1
Forum: Hardware mods 14 January 2019, 23:32
Replies: 518
Views: 123,483
Posted By patzik
Latest version with the corrections that were...

Latest version with the corrections that were needed.

I uploaded the eagle files for who needs it, if all is ok I will also make the gerbers.
Forum: MarketPlace 17 December 2018, 17:50
Replies: 3
Views: 376
Posted By patzik
Just checked, shipping alone is 60 euro

Just checked, shipping alone is 60 euro
Forum: MarketPlace 17 December 2018, 17:47
Replies: 3
Views: 376
Posted By patzik
I hace a nice 1942 here, but I’m afraid shipping...

I hace a nice 1942 here, but I’m afraid shipping cost from the Netherlands will be very high.
Forum: Hardware mods 28 September 2018, 01:32
Replies: 518
Views: 123,483
Posted By patzik
Ok, I did the last corrections and added the led...

Ok, I did the last corrections and added the led jumper next to the select switch jumper. They share a common ground so only 3 wires needed.
The resistor is the same resistor as used with the...
Forum: Hardware mods 25 September 2018, 01:01
Replies: 518
Views: 123,483
Posted By patzik
I'll have a look at it when I have some time, not...

I'll have a look at it when I have some time, not sure if I understand all you wanted in the PM, so I'll get back to you on that...

Can't find JP4, where is that? (edit, never mind.... found it)
...
Forum: Hardware mods 19 September 2018, 23:59
Replies: 518
Views: 123,483
Posted By patzik
Jumper version on request... I deleted the...

Jumper version on request...

I deleted the jumper connections, also the clock jumper, and the solder jumper on the backside. I this the way you want it?
Forum: Hardware mods 19 September 2018, 17:13
Replies: 518
Views: 123,483
Posted By patzik
Here's the way I solved this...

Here's the way I solved this...
Forum: Hardware mods 17 September 2018, 18:44
Replies: 518
Views: 123,483
Posted By patzik
Is it possible to get the gerbers for the boards...

Is it possible to get the gerbers for the boards seperate? So I can panelize them with other boards? And join them with breakout tabs.
Forum: Hardware mods 17 September 2018, 16:47
Replies: 518
Views: 123,483
Posted By patzik
I just found this project, and would like to...

I just found this project, and would like to order some boards.
Looked at the gerber and see they are joined in a way unknow to me.
How do you seperate the 2 boards? Why not use breakout tabs?
Forum: support.Hardware 07 April 2018, 14:47
Replies: 3
Views: 331
Posted By patzik
Well, I found the culprit, it was indeed a trace....

Well, I found the culprit, it was indeed a trace. The disk write data line had a small break.
Forum: support.Hardware 06 April 2018, 01:29
Replies: 3
Views: 331
Posted By patzik
I think it was recapped, what traces should I...

I think it was recapped, what traces should I start to look at?
Forum: support.Hardware 06 April 2018, 00:13
Replies: 3
Views: 331
Posted By patzik
Amiga 600 floppy reads fine, but doesn't write

I have an A600 I'd like to repair for a friend. The floppydrive reads fine but it doesn't write. Whenever I write anything to a drive, internal, external or gotek (internal or external), the...
Forum: News 10 February 2018, 16:22
Replies: 962
Views: 162,708
Posted By patzik
I have a small problem with the rotary, I think i...

I have a small problem with the rotary, I think i wired it correctly but it seems to turn the wrong way. Bigger issue is that it sometimes registers one ‘click’ the wrong way.
So turning it one way...
Showing results 1 to 23 of 23

 
Forum Jump

All times are GMT +2. The time now is 02:46.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.06454 seconds with 10 queries