English Amiga Board


Go Back   English Amiga Board > Search Forums

Showing results 1 to 30 of 30
Search took 0.01 seconds.
Search: Posts Made By: spawnerbr
Forum: support.Hardware 21 October 2019, 08:05
Replies: 5
Views: 231
Posted By spawnerbr
CD32 with new Power Supply

Hi all. I'm using a new Power Supply on my CD32 that don't have PSU, So I bought a generic PSU that has 5v and 12v with 2A on both. My CD32 is a NTSC and on the original CD32 PSU I know that the 5v...
Forum: support.Hardware 14 August 2019, 19:05
Replies: 5
Views: 1,345
Posted By spawnerbr
I recreated the pins using a 3d Printer.

I recreated the pins using a 3d Printer.
Forum: Hardware mods 31 July 2017, 00:37
Replies: 7
Views: 796
Posted By spawnerbr
The problem is that I have 6 Amigas with original...

The problem is that I have 6 Amigas with original drives and on this case New Zealand Story and SysTest loaded without any problem, but hearing de disk drives, it don't looks like a regular way to...
Forum: Hardware mods 30 July 2017, 17:39
Replies: 7
Views: 796
Posted By spawnerbr
The disks are working. The problem is some games...

The disks are working. The problem is some games runs perfect on the converted disk drives and some games/apps that uses a specific boot are not booting. The hand goes out, the disk tries to read and...
Forum: Hardware mods 30 July 2017, 14:35
Replies: 7
Views: 796
Posted By spawnerbr
But this problem can make some games load and...

But this problem can make some games load and others with very specific boot not load?
Forum: Hardware mods 29 July 2017, 23:56
Replies: 7
Views: 796
Posted By spawnerbr
Converted Floppies with Bootblock

I have converted three PC HD floppies to run on the Amiga. I loaded some games, but I have other games (like New Zealand Story) that are not booting. I insert the disk, the Amiga tries to boot, you...
Forum: support.Hardware 22 May 2017, 07:34
Replies: 2
Views: 925
Posted By spawnerbr
SOLVED! After remove this, the DC is back! ...

SOLVED! After remove this, the DC is back!

http://i794.photobucket.com/albums/yy225/spawnerbr/IMG_6541.jpg (http://s794.photobucket.com/user/spawnerbr/media/IMG_6541.jpg.html)
Forum: support.Hardware 22 May 2017, 00:31
Replies: 2
Views: 925
Posted By spawnerbr
Chinon FB-354 Floppy on Amiga 500

I got a Chinon FB-354 Floppy Drive from an Atari ST and put this on my Amiga 500. The drive is modified as I can see. So, on the Amiga 500, when you turn the computer on, it tries two times to find a...
Forum: support.Hardware 03 January 2017, 04:30
Replies: 15
Views: 1,626
Posted By spawnerbr
Without the boards, the computer works. The HDD...

Without the boards, the computer works. The HDD works. The floppy works. But if I connected one of these boards, black screen only.
Forum: support.Hardware 03 January 2017, 02:49
Replies: 15
Views: 1,626
Posted By spawnerbr
DKB 1202 was always unstable here. I tested with...

DKB 1202 was always unstable here. I tested with 2 memory banks and only with 4MB (one bank) I have used it for years. Then, I got this E-Matrix 1230-50 (Viper 1230 Mk-V) with 16MB but it freezes...
Forum: support.Hardware 02 January 2017, 00:09
Replies: 15
Views: 1,626
Posted By spawnerbr
Yes, I used a special spray to clean all pins...

Yes, I used a special spray to clean all pins from the accelerator and memory cards, but to be honest, I don't think that the problem is with the boards. Unfortunately, I don't have another A1200 to...
Forum: support.Hardware 31 December 2016, 21:19
Replies: 15
Views: 1,626
Posted By spawnerbr
I opened the A1200 and remove everything (metal...

I opened the A1200 and remove everything (metal plates, keyboard...) just to use and connect the boards and see if it is connected. No pins loose. I cleaned the expansion slot too with isopropyl...
Forum: support.Hardware 31 December 2016, 20:24
Replies: 15
Views: 1,626
Posted By spawnerbr
Yes, my power supply is from an A500 and I tested...

Yes, my power supply is from an A500 and I tested with one A1200 power supply and 2 power supplies from A500. Same behavior.
Forum: support.Hardware 31 December 2016, 19:57
Replies: 15
Views: 1,626
Posted By spawnerbr
Amiga 1200 unstable with memory and accelerator boards

I have an Amiga 1200 from a long time and I got a long time ago a DKB 1202 RAM board. This board was always unstable and sometimes it resets the 1200, so I tried to use only with one RAM module of...
Forum: support.Hardware 14 July 2016, 06:00
Replies: 7
Views: 1,209
Posted By spawnerbr
No, we don't have Scart on TVs. I have a Scaler...

No, we don't have Scart on TVs. I have a Scaler Box to conver Scart to HDMI that I use on my Spectrum and other systems. I have a 15Khz monitor to connect from the Amiga RGB, but I'm trying another...
Forum: support.Hardware 10 July 2016, 14:59
Replies: 7
Views: 1,209
Posted By spawnerbr
A520 Color Doubt

Hi all.
I got an A520 PAL from Europe and have tried to use with my Color Conversion Box from PAL to HDMI. I use that Color Conversion Box on all computers that I have from Europe. Works perfectly...
Forum: support.Hardware 17 May 2016, 05:55
Replies: 11
Views: 3,367
Posted By spawnerbr
Gotek HxC and what to do?

I got an Gotek yesterday. Then I paid to use HxC firmware on my computers and the first one to test was my Amiga 500.
After use the Gotek connected to an USB TTL board, I uploaded the HxC firmware...
Forum: support.Hardware 24 April 2016, 05:59
Replies: 3
Views: 953
Posted By spawnerbr
After some tries, I changed the speed to 9600 and...

After some tries, I changed the speed to 9600 and everything happens. Thanks for the RX/TX tip.
Forum: support.Hardware 24 April 2016, 04:30
Replies: 3
Views: 953
Posted By spawnerbr
Yeah, after read and read I did that mistake. ...

Yeah, after read and read I did that mistake.
Now I got this message:
"unrecognized device – please reset your device then try again"
I reset the Gotek and no way. Then, after a boot, I did it...
Forum: support.Hardware 23 April 2016, 23:25
Replies: 3
Views: 953
Posted By spawnerbr
Not connecting to a Gotek board to upgrade to Cortex

I bought this week a Gotek floppy emulator and a USB TTL board to change de firmware to Cortex. After read some articles and watch some videos, I think I did the right connections from the Gotek...
Forum: support.Hardware 03 April 2016, 19:04
Replies: 3
Views: 1,044
Posted By spawnerbr
It worked with me on CRT monitors, but when I...

It worked with me on CRT monitors, but when I tried to use in all kinds of LCD or LED monitors, the vertical bars appeared. Only when I use Multiscan Laced, the vertical bars disappeared.
Forum: support.Hardware 24 March 2016, 03:15
Replies: 3
Views: 1,044
Posted By spawnerbr
:(

:(
Forum: support.Hardware 22 March 2016, 10:22
Replies: 3
Views: 1,044
Posted By spawnerbr
MicroniK Scandex scan doubler Problem?

I have a MicroniK Scandex scan doubler that I used a lot on the past. So, I got my A1200 back in action and tried to connect it on my TV PC connector [VGA/RGB].
So, I got surprised because there are...
Forum: support.Hardware 19 March 2016, 17:31
Replies: 16
Views: 1,087
Posted By spawnerbr
I understand the 32 characters problem with the...

I understand the 32 characters problem with the applications. But for me is strange to see on shell the long name incomplete, but on the WB I can see more than 32 characters.
Fat95 can fix something...
Forum: support.Hardware 19 March 2016, 06:40
Replies: 16
Views: 1,087
Posted By spawnerbr
Thanks guys. The PCMCIA is working. Easy. I'm...

Thanks guys. The PCMCIA is working. Easy. I'm using CFD to mount the CF.
I still have some doubts. I tried to format de CF on the Amiga and I got an error.
Another question is about the size of the...
Forum: support.Hardware 13 March 2016, 20:08
Replies: 16
Views: 1,087
Posted By spawnerbr
Just one more thing. What is the GB limit of this...

Just one more thing. What is the GB limit of this hardware? Is possible to use a CF Adapter that accepts SD card?
Forum: support.Hardware 13 March 2016, 19:36
Replies: 16
Views: 1,087
Posted By spawnerbr
Thanks!

Thanks!
Forum: support.Hardware 13 March 2016, 17:03
Replies: 16
Views: 1,087
Posted By spawnerbr
Great! Thanks. And which software you are using...

Great! Thanks. And which software you are using to make it works?
Forum: support.Hardware 13 March 2016, 14:49
Replies: 16
Views: 1,087
Posted By spawnerbr
SanDisk PCMCIA CF Adapter Compatibility

Anyone can help me to know if this model works with A1200/600:
...
Forum: support.Hardware 09 March 2016, 23:08
Replies: 1
Views: 459
Posted By spawnerbr
Amiga 1200 not recognizing floppies

I start to use my Amiga 1200 and copying some floppies to the IDE>SD Hard Drive. During this process, the Amiga screen start to blink like you turning on and off a lot of times. So I turned off,...
Showing results 1 to 30 of 30

 
Forum Jump

All times are GMT +2. The time now is 11:10.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.06418 seconds with 10 queries