English Amiga Board


Go Back   English Amiga Board > Search Forums

Showing results 1 to 40 of 716
Search took 0.06 seconds.
Search: Posts Made By: turrican9
Forum: support.Hardware 27 August 2019, 00:12
Replies: 7
Views: 267
Posted By turrican9
Here is one...

Here is one https://amigastore.eu/en/565-rom-13-amiga-5006002000.html

Also, take note of the Amiga 500 Rev.5 info on this page. In case you have a rev.5 motherboard you also need an adapter
Forum: support.Hardware 26 August 2019, 23:14
Replies: 7
Views: 267
Posted By turrican9
For floppy/Gotek gaming you want kickstart 1.2 or...

For floppy/Gotek gaming you want kickstart 1.2 or 1.3 in the Amiga 500. And you don't want the 1MB chip RAM mod. Quite a few floppy games will have issues with Kickstart 2.0 and above. Same goes for...
Forum: support.Hardware 25 August 2019, 19:18
Replies: 18
Views: 662
Posted By turrican9
Jope already explained it good. Basically you...

Jope already explained it good. Basically you seem to have a full screen workbench so you have them set up nicely together in that regard. Other than that the indivision overscan I set the best I...
Forum: support.Hardware 25 August 2019, 17:00
Replies: 18
Views: 662
Posted By turrican9
Basically no modern LCDs will list 50Hz for...

Basically no modern LCDs will list 50Hz for vertical sync. My Phillips 17 inch 5:4 LCD/LED modern screen which I use on my A1200/AGA MK2 combo just happened to work with 50Hz at 30KHz +. The AGA MK2...
Forum: support.Hardware 25 August 2019, 00:07
Replies: 29
Views: 2,007
Posted By turrican9
I'm happy with my various accelerators: ACA 1233,...

I'm happy with my various accelerators: ACA 1233, ACA 620, Furia, ACA 500 + ACA 1221. They all do the job just fine for whdload and stuff. I wouldn't mind having a Vampire but never felt it was worth...
Forum: support.Hardware 24 August 2019, 18:44
Replies: 18
Views: 662
Posted By turrican9
So your workbench seems to fill the screen and...

So your workbench seems to fill the screen and games seems to show up correctly appart from a bit stretched because of 16:10 screen. And I assume your screen will not support 50Hz? Honestly, I would...
Forum: support.Hardware 22 August 2019, 22:55
Replies: 18
Views: 662
Posted By turrican9
Hey there. In my config I try to keep the correct...

Hey there. In my config I try to keep the correct aspect ratio and overscan area. So most games will not fill the screen. This is similar to how it would show if you connected your Amiga to a...
Forum: support.Hardware 13 August 2019, 00:05
Replies: 11
Views: 508
Posted By turrican9
It's all a matter of taste yes. But honestly, I...

It's all a matter of taste yes. But honestly, I think my 702As have very vibrant colours and does not look washed out to me. And the level of black is not an issue for me. I think black is black...
Forum: support.Hardware 11 August 2019, 18:40
Replies: 47
Views: 984
Posted By turrican9
I had this happen on one of my A500 cases. Also...

I had this happen on one of my A500 cases. Also this is very common on the grey keys aswell. Let's hope the A500 kickstarter cases will be a thing.

Since your case was already damaged and was...
Forum: support.Hardware 11 August 2019, 16:16
Replies: 11
Views: 508
Posted By turrican9
Usually the sweet spot for the pixel clock is...

Usually the sweet spot for the pixel clock is between 88 to 94. When you see no vertical lines on the blue whdload information/loading window the pixel clock should be correct. Also, finetuning the...
Forum: support.Hardware 11 August 2019, 15:30
Replies: 9
Views: 219
Posted By turrican9
Since you have tried two other disk drives and...

Since you have tried two other disk drives and they show the same symptoms I would try to swap the two CIA's around. Maybe the one that controlls the floppy is not working. By swapping them around...
Forum: support.Hardware 11 August 2019, 15:25
Replies: 11
Views: 508
Posted By turrican9
I would recommend a BenQ BL 702A or BL 912 with a...

I would recommend a BenQ BL 702A or BL 912 with a RGB to VGA adapter. After tuning pixel clock they look great with Amiga.
Forum: News 02 June 2019, 17:25
Replies: 61
Views: 8,314
Posted By turrican9
I have two of these. They have horrible input lag...

I have two of these. They have horrible input lag and oversaturrated colours. I do not recommend these for gaming because of the horrible input lag. Other than adventure games or demos where the...
Forum: News 07 February 2019, 23:25
Replies: 61
Views: 8,314
Posted By turrican9
Bad camera but it looks good in real life. Shows...

Bad camera but it looks good in real life. Shows the overscan in Pinball dreams correctly. However, there are a few games that will cut off a very small bit of the horizontal overscan. I have made...
Forum: News 07 February 2019, 23:06
Replies: 61
Views: 8,314
Posted By turrican9
Hello, how strange it stays at 1280x1024. The way...

Hello, how strange it stays at 1280x1024. The way this scandoubler works is you first set the VGA resolution then go and set the indivision resolution.

To make this work correctly you need to put...
Forum: News 06 February 2019, 17:31
Replies: 61
Views: 8,314
Posted By turrican9
One or two positive things about the Indivision...

One or two positive things about the Indivision scandoublers that don't get mentioned very often is they can use any type of standard monitor as long as your willing to accept frameskipping at 60Hz....
Forum: News 05 February 2019, 23:00
Replies: 61
Views: 8,314
Posted By turrican9
In certain resolutions like if you make a custom...

In certain resolutions like if you make a custom 720x576 Vsync profile there is quite abit of noise (waves going over the picture). However, on most other resolutions there are no noticeable noise....
Forum: News 05 February 2019, 21:35
Replies: 61
Views: 8,314
Posted By turrican9
Well, it will vary from monitor to monitor. I...

Well, it will vary from monitor to monitor. I have mine set up with a 17 inch 5:4 Sony LED LCD. Using DVI. custom resolution at 720x566 for both PAL and PAL hi-res laced. Get full overscan as far as...
Forum: News 04 February 2019, 23:43
Replies: 61
Views: 8,314
Posted By turrican9
Best so far on my BenQ BL 702A is VGA profile at...

Best so far on my BenQ BL 702A is VGA profile at 1472x1060, 50.23xxHz (will check the exact value if needed), Vysnc on. Indivision profile at 736x530 and scanlines at 25%. This switches the...
Forum: support.Hardware 04 February 2019, 21:04
Replies: 12
Views: 413
Posted By turrican9
I don't know what kind of LCD you have and if it...

I don't know what kind of LCD you have and if it allows for finetuning of pixel and phase clocks. But my BenQ BL 702As and BL912 can cause similar symptoms if I don't finetune the pixel and phase...
Forum: support.Hardware 04 February 2019, 16:52
Replies: 12
Views: 413
Posted By turrican9
Is this "frameskipping" present on both...

Is this "frameskipping" present on both Horizontal and vertical scrolling? What kind of display are you using?
Forum: News 03 February 2019, 19:26
Replies: 61
Views: 8,314
Posted By turrican9
So far I found a few issues with the Indi ECS V2....

So far I found a few issues with the Indi ECS V2. When making any profile which allows the overscan area the picture is always shifted to the right with no possibility of extending the right side...
Forum: News 31 January 2019, 00:51
Replies: 61
Views: 8,314
Posted By turrican9
yeah. I already have the AGA MK2 and I spent a...

yeah. I already have the AGA MK2 and I spent a ton of time tweaking it to the monitor I use for my A1200. AGA MK2 is missing Vsync but in the end I managed to tweak it to almost smooth 50Hz...
Forum: News 30 January 2019, 19:49
Replies: 61
Views: 8,314
Posted By turrican9
It seems like I was wrong in my earlier...

It seems like I was wrong in my earlier statements. The ECS V2 is extremely advanced. I have been testing like crazy. Today I had another breakthrough where I found that in the VGA settings I didn't...
Forum: News 19 January 2019, 23:31
Replies: 61
Views: 8,314
Posted By turrican9
Another thing I noticed is that every time I make...

Another thing I noticed is that every time I make a 50Hz overscan profile the pixel clock on the BL702A does nothing to finetune the picture. A good way to see when it's not tuned is to look at the...
Forum: News 19 January 2019, 19:44
Replies: 61
Views: 8,314
Posted By turrican9
I found the main problem for me when trying to...

I found the main problem for me when trying to make any sort of profile with the overscan area, or even without the overscan area and 50Hz on the ECS V2 in combination with the BenQ BL 702A monitor....
Forum: News 19 January 2019, 00:11
Replies: 61
Views: 8,314
Posted By turrican9
almost looks like the AGA MK2 and this new ECS V2...

almost looks like the AGA MK2 and this new ECS V2 is geared at people wanting full screen and showing the workbench as nice as possible. And just as with the AGA MK2 there are alot of profiles for...
Forum: News 18 January 2019, 21:39
Replies: 61
Views: 8,314
Posted By turrican9
Unless Indivision provides a fully working 50Hz...

Unless Indivision provides a fully working 50Hz profile that gives a nice picture with overscan (like Indivision ECS V1) then I would say no, for me it would not be a big upgrade. Unless I can manage...
Forum: News 18 January 2019, 17:33
Replies: 61
Views: 8,314
Posted By turrican9
So my Indivision ECS V2 arrived a few days ago....

So my Indivision ECS V2 arrived a few days ago. So far it looks very nice. Has a very advanced tweaking utility. Takes quite some time to understand how to use it, just like with the AGA MK2 I spend...
Forum: News 31 December 2018, 21:33
Replies: 61
Views: 8,314
Posted By turrican9
Nice :) I took the chance on ordering one 4 or 5...

Nice :) I took the chance on ordering one 4 or 5 days ago. Can't wait to test it out :great
Forum: support.Hardware 31 December 2018, 00:48
Replies: 13
Views: 778
Posted By turrican9
No problem. I'm happy to see you get it working...

No problem. I'm happy to see you get it working properly :)
Forum: support.Hardware 30 December 2018, 22:56
Replies: 13
Views: 778
Posted By turrican9
Here is the settings I used for resolution and...

Here is the settings I used for resolution and overscan with that profile

http://i67.tinypic.com/23uvqlh.jpg

http://i68.tinypic.com/2a7uzw2.jpg
Forum: support.Hardware 30 December 2018, 22:26
Replies: 13
Views: 778
Posted By turrican9
This profile is made for correct Amiga aspect...

This profile is made for correct Amiga aspect ratio, not to stretch for widescreens. Another thing that I did is make the horizontal resolution between hi-res (workbench and lo-res (games) identical,...
Forum: support.Hardware 30 December 2018, 08:48
Replies: 13
Views: 778
Posted By turrican9
Put it anywhere you want. Just load the profile...

Put it anywhere you want. Just load the profile with AGA MK2 config utility

Edit: Also smart to press 'test' before you apply. In case you get a black screen
Forum: Retrogaming General Discussion 28 December 2018, 04:24
Replies: 5
Views: 492
Posted By turrican9
As far as I understand most of these 020...

As far as I understand most of these 020 accelerators have some timing issues with a few whdload games and quite a few whdload demos. Some of these can be fixed with tooltips. I have it on my ACA...
Forum: support.Hardware 27 December 2018, 23:20
Replies: 13
Views: 778
Posted By turrican9
Here is a profile I made for a BenQ BL912 last...

Here is a profile I made for a BenQ BL912 last year. It has a custom 720x576 resolution which gives the correct resolution for PAL Amigas. This one is 60Hz so hopefully it should work for your screen...
Forum: support.Hardware 27 December 2018, 23:06
Replies: 13
Views: 778
Posted By turrican9
Look in this thread...

Look in this thread http://eab.abime.net/showthread.php?t=69938&page=3

Your monitor might not handle 50Hz profiles so have another screen available which you can connect to RGB in case you get a...
Forum: support.Hardware 27 December 2018, 21:35
Replies: 13
Views: 778
Posted By turrican9
hey there. You need to use the config tool and...

hey there. You need to use the config tool and select some lower resolutions to get a bigger picture on the screen. There are alot of profiles you can download as well if you google.

I spent alot...
Forum: Retrogaming General Discussion 27 December 2018, 11:02
Replies: 5
Views: 492
Posted By turrican9
I am happy with my ACA 1221 aswell. I also...

I am happy with my ACA 1221 aswell. I also unlocked all the upgrades shortly after I bought it and had no problems with that. I use mine together with an ACA 500 and it runs fine. It has issues with...
Forum: support.Hardware 27 December 2018, 05:26
Replies: 78
Views: 12,195
Posted By turrican9
So anyone tested the new Indivision ECS V2? It is...

So anyone tested the new Indivision ECS V2? It is supposed to have a 50Hz mode and also scaling settings. I wonder if this new one will store the 50Hz setting properly and how good these scaling...
Showing results 1 to 40 of 716

 
Forum Jump

All times are GMT +2. The time now is 10:13.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Page generated in 0.10741 seconds with 10 queries