English Amiga Board


Go Back   English Amiga Board > Search Forums

Showing results 1 to 40 of 821
Search took 0.07 seconds.
Search: Posts Made By: turrican9
Forum: support.Hardware 03 August 2020, 06:40
Replies: 6
Views: 339
Posted By turrican9
So what does it mean when the multiplex or logic...

So what does it mean when the multiplex or logic chips have an 'N' at the end of the code? Like U34 is a 74373. But I've noticed these chips usually have an 'N' at the end. Looking at ebay there are...
Forum: support.Hardware 03 August 2020, 00:52
Replies: 54
Views: 3,019
Posted By turrican9
This one...

This one (https://amigastore.eu/en/683-a-power-hq-power-supply-for-amiga-5005006001200.html) has been working perfectly for me. Mostly using it on A500 Plus, ACA 500 + ACA 1221
Forum: support.Hardware 02 August 2020, 21:54
Replies: 4
Views: 230
Posted By turrican9
As it happens, I have the ECS V2. First of all,...

As it happens, I have the ECS V2. First of all, the off center thing is partly/fully caused by quite a few missing pixels on the right side. I had a thread going on about that and other bugs in the...
Forum: support.Hardware 02 August 2020, 20:22
Replies: 6
Views: 339
Posted By turrican9
yeah, I've looked very closely on this. As I've...

yeah, I've looked very closely on this. As I've said, planning on taking most of the parts from the 6A board.

Did you have a proper desoldering station or did you try desoldering with a solder...
Forum: support.Hardware 02 August 2020, 20:06
Replies: 6
Views: 339
Posted By turrican9
Thanks. I didn't know about that adapter to use...

Thanks. I didn't know about that adapter to use 8372A in A500 Plus boards. Very cool. Will take a closer look at this one.

I was actually planning on desoldering an 8375 from a less than perfect...
Forum: support.Hardware 02 August 2020, 18:12
Replies: 6
Views: 339
Posted By turrican9
Ordered a replica A500 ++ motherboard and have a few questions.

So I finally ordered a purple A500 ++ Replica motherboard.

I already have a working A500 plus motherboard. It's not in perfect condition but I have repaired it and will not use it as a donor...
Forum: support.Hardware 02 August 2020, 06:43
Replies: 52
Views: 1,557
Posted By turrican9
There is a few whdload games not working with the...

There is a few whdload games not working with the 020 minimig. Super Off Road is one of them. I heard it will help to switch to 68000. I heard there is a few issues with the minimig 020 causing it
...
Forum: support.Hardware 31 July 2020, 06:38
Replies: 52
Views: 1,557
Posted By turrican9
I vote for FPGA over emulation. While I don't...

I vote for FPGA over emulation. While I don't have a MiSTer I have a Turbo Chameleon V2 with minimig core. I also have a ton of real Amiga setups.

Using WinUAE I can feel input lag. I'm sure...
Forum: support.Hardware 30 July 2020, 09:05
Replies: 19
Views: 552
Posted By turrican9
Do you have any way of testing the Furia on...

Do you have any way of testing the Furia on another A600 board just to confirm it is still fine?

Since your A600 is working just fine without the Furia maybe try to clean the pins of the 68000...
Forum: Retrogaming General Discussion 29 July 2020, 08:33
Replies: 31
Views: 1,226
Posted By turrican9
I've tried scanline generators straight between...

I've tried scanline generators straight between the RGB 15KHz and monitor. The problem is the scanlines will be way too thick. Will not look acceptable at all.

You need 31KHz to add proper...
Forum: support.Hardware 28 July 2020, 21:24
Replies: 19
Views: 552
Posted By turrican9
Do you have 'ide on' in the startup sequence for...

Do you have 'ide on' in the startup sequence for Furiatune? Ide on causes freezes and random crashes and will only work in some A600 (That's marked A300 on the boad) boards that has a gary rev 0.
Forum: Retrogaming General Discussion 27 July 2020, 21:20
Replies: 69
Views: 3,045
Posted By turrican9
Well, at least the car itself will look more like...

Well, at least the car itself will look more like the SNES version if you try NTSC. NTSC will stretch the picture vertically. I also have PAL Amigas but I have tried NTSC by setting tooltips to NTSC.
Forum: Retrogaming General Discussion 27 July 2020, 19:16
Replies: 69
Views: 3,045
Posted By turrican9
Great work. Thanks :great The Amiga version...

Great work. Thanks :great

The Amiga version looks wider because it's running in PAL. If you switch it to NTSC the car will not be as wide and look more like the SNES version
Forum: support.Hardware 27 July 2020, 16:57
Replies: 12
Views: 684
Posted By turrican9
Thanks. Would be interesting to know if...

Thanks.

Would be interesting to know if other people with Rev 1.1 boards has the same 24K resistor as R612.

@Superman I guess your Rev 1 board must have the 47K resistor at R612 since your...
Forum: Retrogaming General Discussion 26 July 2020, 22:22
Replies: 69
Views: 3,045
Posted By turrican9
Did you select A500/A1200 cycle excact under 'CPU...

Did you select A500/A1200 cycle excact under 'CPU and FPU' and also under 'chipset' select both Cycle-exact (full) and Cycle-exact (DMA/memory access)?
Forum: support.Hardware 25 July 2020, 22:26
Replies: 12
Views: 684
Posted By turrican9
Think I found the thing I must have googled the...

Think I found the thing I must have googled the other day.

First this post (http://eab.abime.net/showpost.php?p=1360869&postcount=32) of a guy telling about a similar behaviour to mine. But he...
Forum: Retrogaming General Discussion 25 July 2020, 00:21
Replies: 69
Views: 3,045
Posted By turrican9
This is the same video you posted in post 25?...

This is the same video you posted in post 25? https://eab.abime.net/showpost.php?p=1414458&postcount=25
Forum: support.Hardware 24 July 2020, 22:26
Replies: 12
Views: 684
Posted By turrican9
Very strange indeed. My board is working...

Very strange indeed. My board is working perfectly for everything I throw at it. Only thing I discovered was that I had to do a soft reset to get the full mem after cold boot.

I think I googled...
Forum: support.Hardware 24 July 2020, 22:13
Replies: 12
Views: 684
Posted By turrican9
Nope did not make a difference. Still have to...

Nope did not make a difference. Still have to give it one soft reset to get the memory added. Again, I don't think this happened on my Rev 1.5 and Rev 2D boards.

Maybe this is just a thing with...
Forum: support.Hardware 24 July 2020, 22:08
Replies: 12
Views: 684
Posted By turrican9
I see you have addmem last. I will try that and...

I see you have addmem last. I will try that and report back.
Forum: support.Hardware 24 July 2020, 22:03
Replies: 12
Views: 684
Posted By turrican9
Interesting. What is your startup line in boot...

Interesting. What is your startup line in boot sequence?

Here is mine: C:Furiatune addmem shadowrom cache on fpu on >NIL:
Forum: support.Hardware 24 July 2020, 18:07
Replies: 12
Views: 684
Posted By turrican9
Furia addmem needs one reset with Amiga 600 Rev 1.1 (A300 board) (Solved!)

So I recently got hold of an A600 Rev 1.1 (A300 motherboard) which I have repaired and is now fully working.

Using A Furia (the white PCB version) with SD to IDE and A604n. Funnily enough I had...
Forum: Retrogaming General Discussion 24 July 2020, 01:09
Replies: 69
Views: 3,045
Posted By turrican9
I agree. It looks the same. The ECS version is at...

I agree. It looks the same. The ECS version is at least as smooth as the SNES version. Maybe even smoother.

Music is a matter of taste. Both are good. I do not have experience with the CD32 music...
Forum: support.Hardware 23 July 2020, 12:47
Replies: 14
Views: 460
Posted By turrican9
For sure. I have a much better understanding of...

For sure. I have a much better understanding of the audio circuitry in Amiga 600s now. It will be almost identical in A1200s. So I should be very comfortable doing repairs of the audio circuitry in...
Forum: support.Hardware 23 July 2020, 12:15
Replies: 14
Views: 460
Posted By turrican9
So I put back the two 1K resistors. I desoldered...

So I put back the two 1K resistors. I desoldered C305. It was not easy because the joints were corroded.

I borrowed C305 from the working 2D board and soldered it in the 1.1 board.

It works....
Forum: support.Hardware 23 July 2020, 11:19
Replies: 14
Views: 460
Posted By turrican9
Yes, I did measure the resistors out of circuit....

Yes, I did measure the resistors out of circuit. Same result. The seller of this board said that it had been reflowed several times. So I was actually thinking these components had been overheated....
Forum: Retrogaming General Discussion 22 July 2020, 12:10
Replies: 69
Views: 3,045
Posted By turrican9
And then I can start a club for the ECS version...

And then I can start a club for the ECS version of Top Gear 2. You can start the CD32 AGA Top Gear 2 club and we can run around and scream at people: Top Gear 2 is not a bad racing game on Amiga!...
Forum: support.Hardware 22 July 2020, 11:53
Replies: 14
Views: 460
Posted By turrican9
Yeah, but it was quite bad. Look at my last post....

Yeah, but it was quite bad. Look at my last post. I just updated it with an 'Edit2'
Forum: support.Hardware 22 July 2020, 08:41
Replies: 14
Views: 460
Posted By turrican9
So got it working now. Don't know where to...

So got it working now. Don't know where to begin....

Been working all night long on this issue. Trial and error. Think I must have been on this for 2 days non stop.

First of all I found out...
Forum: support.Hardware 22 July 2020, 00:39
Replies: 14
Views: 460
Posted By turrican9
I was actually just looking at that video. And I...

I was actually just looking at that video. And I noticed these resistors looks to be the same between the Rev 1.1 and 2D boards. 1.5K and the same he has on his 1A board in the video. which he...
Forum: support.Hardware 22 July 2020, 00:02
Replies: 14
Views: 460
Posted By turrican9
As soon as I put the good LF347 back in the Rev...

As soon as I put the good LF347 back in the Rev 1.1 board I'm missing the positive voltages on all pins. All shows as negative. And the +12v pin shows just a few negative volts. If I remove the OP...
Forum: support.Hardware 21 July 2020, 21:59
Replies: 14
Views: 460
Posted By turrican9
So I tranplanted the LF347 from the Rev 2D board....

So I tranplanted the LF347 from the Rev 2D board. Rev 1.1 board also had the LF347 but it's a bit smaller.

Got even worse distortion this time. +12v and -12v still fine and feeding the chip....
Forum: support.Hardware 21 July 2020, 03:03
Replies: 14
Views: 460
Posted By turrican9
Amiga 600 Rev 1.1 Op-Amp problem

So I recently got hold of an Amiga 600 Rev 1.1 (The one that says A300) motherboard.

Motherboard is recapped and is working fine except for one thing. The sound is slightly distorted on both...
Forum: Retrogaming General Discussion 20 July 2020, 22:48
Replies: 69
Views: 3,045
Posted By turrican9
To be honest I think It took me a few days aswell...

To be honest I think It took me a few days aswell before I noticed it was possible scroll down and buy more stuff :D:spin:crazy
Forum: Retrogaming General Discussion 20 July 2020, 21:52
Replies: 69
Views: 3,045
Posted By turrican9
You didn't know you could scroll down and buy...

You didn't know you could scroll down and buy tires, nitro, gearbox and stuff? Even still, you will easily buy all the upgrades long before you are finished with 64 laps. I ended up with hundreds of...
Forum: Retrogaming General Discussion 20 July 2020, 16:18
Replies: 69
Views: 3,045
Posted By turrican9
Well, there is no way I'm putting a CD-rom in any...

Well, there is no way I'm putting a CD-rom in any of my Amigas. CD-roms are dead to me :agree:spin:crazy

Well, if you look at the sky the AGA version seems to have more colours. The ECS version...
Forum: Amiga scene 20 July 2020, 01:46
Replies: 16
Views: 2,363
Posted By turrican9
Thanks for your feedback. I bought a working A500...

Thanks for your feedback. I bought a working A500 plus motherboard a few months back. Traces was still corroded and legs of U12. I cleaned everything up with vingear and fiberglass pen.

Lately I...
Forum: Retrogaming General Discussion 20 July 2020, 01:41
Replies: 69
Views: 3,045
Posted By turrican9
Isn't the CD32 version as slow as the regular AGA...

Isn't the CD32 version as slow as the regular AGA version? The ECS version doesn't slow that much down with rain and snow. Also, did you see you can double tap the fire button for nitro instead of...
Forum: Amiga scene 19 July 2020, 18:29
Replies: 16
Views: 2,363
Posted By turrican9
So I could replace it with a 0.1uF (should equal...

So I could replace it with a 0.1uF (should equal to 100nf) electrolyte radial as long as I get positive and negative leads correctly?
Forum: Retrogaming General Discussion 18 July 2020, 12:24
Replies: 69
Views: 3,045
Posted By turrican9
Wow. Thanks. So similar findings to me then....

Wow. Thanks. So similar findings to me then. Actually I found out by reading the manual that I could double tap the fire button on my joystick for nitro in the ECS version (Guess this goes for AGA...
Showing results 1 to 40 of 821

 
Forum Jump

All times are GMT +2. The time now is 17:02.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.11556 seconds with 10 queries