Classic WB Advanced on TV?

fitzsteve · 02 September 2009, 17:07

Hi,

Getting my 8mb memory upgrade in the next few days (finally!)

Wondering if its possible to use the ADV or ADVSP versions of classic workbench on an A1200 (020) with 8mb Fast Mem but on a standard def TV/Monitor through scart or do I need VGA to use these version os ClassicWB?

The TV has a PC input so if I was to get a VGA converter would there be much chance of it working? Dont really want to spend out on one of these scan doublers.

Thanks in advance.

Steve.

illy5603 · 02 September 2009, 19:31

Should work fine. I upgraded my Classic WB to use HighGFX with an indivision AGA but I believe it is just PAL standard out of the box which should work on your TV just fine.

Check with your TV Manual as to what modes are supported via VGA. I am sure the PAL modes over VGA / INDIVISON AGA or other scan doubler would look fantastic but the 1024X768 HIGHGFX can still be picky on some TV's with VGA inputs from my experience.

Gordon · 02 September 2009, 19:41

Yes it works. I use RGB scart and it flicker a bit with the default resolution, so you can either stick with it or reduce the resolution where the icons become bigger but you still get the cool copper background and nice icons.

fitzsteve · 02 September 2009, 19:47

Thanks for the advice guys!

Loving the look of the advance versions on WinUae so it would be great to use them om my real Amiga...

Steve.

Bloodwych · 02 September 2009, 21:02

You might want to try and simulate performance with an 020 in WinUAE first by disabling JIT and using the CPU/Chipset slider more towards the left.

The speed of the Workbenches goes (Fastest->Slowest) FULL->ADV->ADVSP.

I would advise the FULL on a 020 - the lower resolution, colour depth and lack of Newicons everywhere really makes it zippy:

http://classicwb.abime.net/classicweb/requirements.htm

Plus you don't have to deal with Interlaced screens and the icons/fonts are proportioned for standard TVs.

You can use the ADVSP, but it will be slow on an 020. There is a utility in the C drawer that reduces interlaced flicker in 16 colour screenmodes called MagicTV - you might want to look at it. The default screenmode of the ADVSP version is 64 however, so with that I'd advise using the ADV version.

You can run the ADVSP as Gordon does in non-interlaced mode which will improve performance, but the icons will look big and out of proportion.

Choices, choices.

fitzsteve · 02 September 2009, 21:07

I might give it a go on a CF card first (got an ide-cf converter off ebay for a few £3 and it works a treat!

When cash permits I think I will get an 030 accelerator, should imagine it would run quite nice on that?

Steve.

illy5603 · 04 September 2009, 14:47

Quote:

Originally Posted by fitzsteve

I might give it a go on a CF card first (got an ide-cf converter off ebay for a few £3 and it works a treat!

When cash permits I think I will get an 030 accelerator, should imagine it would run quite nice on that?

Steve.

Indeed it does!

fitzsteve · 04 September 2009, 17:57

Thanks for that! Still waiting for this memory to turn up. Don't you hate slow ebay sellers? Paid for it on Saturday and he just marked it as dispatched today, I know it was a bank holiday but still when I sell its posted first thing next working day!

Eyeing up an M-TEC (viper) 030 thats going for £80 BIN tempted but still think thats high, given that the card is limited to 8mb. These things just sell on abay for some silly prices. Paid £35 for the 8mb Memory Expansion, he had it listed at £65, made a best offer and he waited 4 days and took it. Still feel thats high but couldn't find one elsewhere so I guess you have to pay what you have to!

illy5603 · 04 September 2009, 18:55

Quote:

Originally Posted by fitzsteve

Thanks for that! Still waiting for this memory to turn up. Don't you hate slow ebay sellers? Paid for it on Saturday and he just marked it as dispatched today, I know it was a bank holiday but still when I sell its posted first thing next working day!

Eyeing up an M-TEC (viper) 030 thats going for £80 BIN tempted but still think thats high, given that the card is limited to 8mb. These things just sell on abay for some silly prices. Paid £35 for the 8mb Memory Expansion, he had it listed at £65, made a best offer and he waited 4 days and took it. Still feel thats high but couldn't find one elsewhere so I guess you have to pay what you have to!

I have used the Mtec Viper and although it is limited to the 8 megs and has no MMU, it was way more game friendly than the M1230XA I am running now. I will be putting the viper in my "gaming" 1200.

fitzsteve · 19 September 2009, 01:28

Well an update really, might be useful if anyone plans to do this in the future...

I have installed Classic WB Advance SP and to be honest I don't mind the slightly slow loading icons and the little bit of flicker, the new icons and extra functionality more than make up for it.

I tried it out first on a 128mb CF card to make sure I was happy and for the last hour I have had my IDE Hard drive out and plugged into the PC and have set everything up.

All in all well chuffed I found this site and got my Amiga out of the loft, last time I used it (4 years ago) I had workbench 3.0 on an 85mb hard drive and played all my games off floppys!

Now I have CWB and 1400 WHDLoad games, oh and a registered version too! £15 well spent.

And to think I was going to sell it

Bloodwych · 19 September 2009, 10:06

Thanks for the update. Always nice when people come back and let everyone know the end result.

fitzsteve · 19 September 2009, 16:27

Quote:

Originally Posted by Bloodwych

Thanks for the update. Always nice when people come back and let everyone know the end result.

No problem! Also for anyone deciding to go with this redical idea, I uploaded a video so you can get an idea of the speed. (By the way iGame was already loaded to save time since it take a while to load)

http://www.youtube.com/watch?v=B6Ay532vJZ0

Bloodwych · 19 September 2009, 17:03

Wow, that runs a lot faster than I thought.

Last time I tested it on my A1200, I hadn't optimised FBlit for Scalos windows in fastram and hadn't enabled Iconbefast. Looks like those two additions really makes it fly even on an 020.

Looks really good, if I do say so myself.

Did you find the Alt bug in iGame (where you rescan a repository after adding more games and Alt appears in the list against previously installed titles). I find you have to delete the old game list before re-scanning.

You just wait for the next release - a full screenshot pack for iGame (and hopefully KGLoad).

fitzsteve · 19 September 2009, 17:21

Quote:

Originally Posted by Bloodwych

Wow, that runs a lot faster than I thought.

Last time I tested it on my A1200, I hadn't optimised FBlit for Scalos windows in fastram and hadn't enabled Iconbefast. Looks like those two additions really makes it fly even on an 020.

Looks really good, if I do say so myself.

Did you find the Alt bug in iGame (where you rescan a repository after adding more games and Alt appears in the list against previously installed titles). I find you have to delete the old game list before re-scanning.

You just wait for the next release - a full screenshot pack for iGame (and hopefully KGLoad).

I had already put all the games on before I scanned for the first time so didnt see any bugs, look forward to a new release. Keep up the good work

02 September 2009, 17:07	#1
fitzsteve Professional slacker! Join Date: Jul 2009 Location: Kent, UK Age: 33 Posts: 4,799	Classic WB Advanced on TV? Hi, Getting my 8mb memory upgrade in the next few days (finally!) Wondering if its possible to use the ADV or ADVSP versions of classic workbench on an A1200 (020) with 8mb Fast Mem but on a standard def TV/Monitor through scart or do I need VGA to use these version os ClassicWB? The TV has a PC input so if I was to get a VGA converter would there be much chance of it working? Dont really want to spend out on one of these scan doublers. Thanks in advance. Steve.

02 September 2009, 19:41	#3
Gordon Settler Join Date: Feb 2007 Location: Amigastan Posts: 885	Yes it works. I use RGB scart and it flicker a bit with the default resolution, so you can either stick with it or reduce the resolution where the icons become bigger but you still get the cool copper background and nice icons. __________________

02 September 2009, 21:02	#5
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,699	You might want to try and simulate performance with an 020 in WinUAE first by disabling JIT and using the CPU/Chipset slider more towards the left. The speed of the Workbenches goes (Fastest->Slowest) FULL->ADV->ADVSP. I would advise the FULL on a 020 - the lower resolution, colour depth and lack of Newicons everywhere really makes it zippy: http://classicwb.abime.net/classicweb/requirements.htm Plus you don't have to deal with Interlaced screens and the icons/fonts are proportioned for standard TVs. You can use the ADVSP, but it will be slow on an 020. There is a utility in the C drawer that reduces interlaced flicker in 16 colour screenmodes called MagicTV - you might want to look at it. The default screenmode of the ADVSP version is 64 however, so with that I'd advise using the ADV version. You can run the ADVSP as Gordon does in non-interlaced mode which will improve performance, but the icons will look big and out of proportion. Choices, choices. __________________ Live Long and Procrastinate A500 Batman Pack Classic Workbench

19 September 2009, 10:06	#11
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,699	Thanks for the update. Always nice when people come back and let everyone know the end result. __________________ Live Long and Procrastinate A500 Batman Pack Classic Workbench

19 September 2009, 17:03	#13
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,699	Wow, that runs a lot faster than I thought. Last time I tested it on my A1200, I hadn't optimised FBlit for Scalos windows in fastram and hadn't enabled Iconbefast. Looks like those two additions really makes it fly even on an 020. Looks really good, if I do say so myself. Did you find the Alt bug in iGame (where you rescan a repository after adding more games and Alt appears in the list against previously installed titles). I find you have to delete the old game list before re-scanning. You just wait for the next release - a full screenshot pack for iGame (and hopefully KGLoad). __________________ Live Long and Procrastinate A500 Batman Pack Classic Workbench

02 September 2009, 19:31	#2
illy5603 Registered User Join Date: Jul 2008 Location: SPaT CiTY Posts: 457	Should work fine. I upgraded my Classic WB to use HighGFX with an indivision AGA but I believe it is just PAL standard out of the box which should work on your TV just fine. Check with your TV Manual as to what modes are supported via VGA. I am sure the PAL modes over VGA / INDIVISON AGA or other scan doubler would look fantastic but the 1024X768 HIGHGFX can still be picky on some TV's with VGA inputs from my experience.

02 September 2009, 19:47	#4
fitzsteve Professional slacker! Join Date: Jul 2009 Location: Kent, UK Age: 33 Posts: 4,799	Thanks for the advice guys! Loving the look of the advance versions on WinUae so it would be great to use them om my real Amiga... Steve.

02 September 2009, 21:07	#6
fitzsteve Professional slacker! Join Date: Jul 2009 Location: Kent, UK Age: 33 Posts: 4,799	I might give it a go on a CF card first (got an ide-cf converter off ebay for a few £3 and it works a treat! When cash permits I think I will get an 030 accelerator, should imagine it would run quite nice on that? Steve.

04 September 2009, 17:57	#8
fitzsteve Professional slacker! Join Date: Jul 2009 Location: Kent, UK Age: 33 Posts: 4,799	Thanks for that! Still waiting for this memory to turn up. Don't you hate slow ebay sellers? Paid for it on Saturday and he just marked it as dispatched today, I know it was a bank holiday but still when I sell its posted first thing next working day! Eyeing up an M-TEC (viper) 030 thats going for £80 BIN tempted but still think thats high, given that the card is limited to 8mb. These things just sell on abay for some silly prices. Paid £35 for the 8mb Memory Expansion, he had it listed at £65, made a best offer and he waited 4 days and took it. Still feel thats high but couldn't find one elsewhere so I guess you have to pay what you have to!

19 September 2009, 01:28	#10
fitzsteve Professional slacker! Join Date: Jul 2009 Location: Kent, UK Age: 33 Posts: 4,799	Well an update really, might be useful if anyone plans to do this in the future... I have installed Classic WB Advance SP and to be honest I don't mind the slightly slow loading icons and the little bit of flicker, the new icons and extra functionality more than make up for it. I tried it out first on a 128mb CF card to make sure I was happy and for the last hour I have had my IDE Hard drive out and plugged into the PC and have set everything up. All in all well chuffed I found this site and got my Amiga out of the loft, last time I used it (4 years ago) I had workbench 3.0 on an 85mb hard drive and played all my games off floppys! Now I have CWB and 1400 WHDLoad games, oh and a registered version too! £15 well spent. And to think I was going to sell it

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Advanced audio capture	Jerry	request.UAE Wishlist	6	29 January 2006 11:45
Elite Advanced v1.2 has been released	AmiGer	project.CARE	12	14 September 2005 07:52
Elite Advanced on HD	killergorilla	project.CARE	5	05 January 2005 21:28
Advanced Search	bippym	HOL data problems	11	11 April 2003 22:47
GeneticSpecies on GameBoy Advanced	RetroMan	Retrogaming General Discussion	19	19 September 2001 19:28

AdSense
Advertisement:

AdSense
Advertisement: