Anyone with Buddha IDE & CDRom Drive?
 

I'm trying (while my Amigas are down,) to build an install boot disk & CD for WB 1.3 & 2.1 (Save time from hunting down all the disks for setting up my drive.) I'm working with WinUAE, and am not having many problems. Well, not any more at least. I can boot and use my virtual drive as a SCSI CDRom drive without issue. It read and works with the ISO I've created. So far, I can boot to an ADF image, which detects which KS I'm using, and installs the correct drivers. I can run the HDTools for either 1.3 or 2.1, and set up the scsi.device HDD without a problem. The ISO can then be used to put all the correct files on the correct partitions. Everything works great :)

The one problem I'm running into now, is how to set the disk so that it will correctly install the CD-Rom (I already know the setting will work for the HDD.) So, does anyone have a Buddha installed and is willing to test CD-Rom mount settings for a real Buddha? I'm using BabelCDFS for compatibility with KS/WB 1.3, and I believe it should work. The main issue I'm running into is if the scsi.device will work through the Buddha, because space is getting tight, and I can't quite get buddha_atapi.device to fit on the disk :( I'll force it if I have too, I'm sure I can save some space if I use 1.3 files on my 2.1 section of the disk. But would like confirmation, and testing if possible.

Thank you :)