English Amiga Board

English Amiga Board (https://eab.abime.net/index.php)
-   support.WinUAE (https://eab.abime.net/forumdisplay.php?f=5)
-   -   general Input Config (https://eab.abime.net/showthread.php?t=105642)

profo 02 February 2021 11:40

general Input Config
 
Hello all,

as i am drooling over DamianD´s Winuae Collection a thing came to mind again.
I am using an USB Competition Pro which needs a FireButton reassigned to work.
Can this setting be saved so that it is available in all configurations? In portable.ini maybe? As of now i have to reassign the Button for every config, which isnt that comfortable. :D

thx for reading :D

DamienD 02 February 2021 12:54

Yes, I can help you with that ;)

Just load a config, configure the button change you require, and then send me that configuration file.

@GMods; probably best if you move this thread's contents into my DamienD's WinUAE Collection thread please.

profo 02 February 2021 13:01

Quote:

Originally Posted by DamienD (Post 1458472)
Yes, I can help you with that ;)

Just load a config, configure the button change you require, and then send me that configuration file.

@GMods; probably best if you move this thread's contents into my DamienD's WinUAE Collection thread please.

Hi Damien,

will do, but this is just for my personal taste, no need to incorporate that in your collection. :bowdown

Also, this doesnt only apply to your collection i think?

best regards
prof

DamienD 02 February 2021 13:14

Totally understand, but will help you to "customise" your copy of my collection ;)

It will be something like this:

Quote:

Originally Posted by DamienD (Post 1212914)

...but I need to you to load a config, configure the button change you require, and then send me that configuration file.

profo 03 February 2021 10:14

1 Attachment(s)
Good Morning :D

for some reason i cant attach it to a PM, so i do it here.
A random config with configured Joystick.

thanks and may the coffee be with you. :D

DamienD 03 February 2021 11:33

Quote:

Originally Posted by profo (Post 1458702)
Good Morning :D

for some reason i cant attach it to a PM, so i do it here.
A random config with configured Joystick.

thanks and may the coffee be with you. :D

Alrighty, at work but quickly did this.

I have no attachment quota left so have put a file in The Zone! called "Speedlink Competition Pro.zip".

Please test though as I can't due to not having WinUAE on my work laptop...

So, you need to follow these and extract the file to "C:\WinUAE\Configurations\Host":

Quote:

Originally Posted by DamienD (Post 1212914)


profo 03 February 2021 12:18

1 Attachment(s)
Sorry to bother anyone, but there is no "Host" to click (following http://eab.abime.net/showpost.php?p=...postcount=3108).
The window for selecting the config is emtpy (that is a fresh downloaded WinUAE in portable mode). Not even the Directory "Host" is shown. :crazy

DamienD 03 February 2021 12:24

Look at this 2nd post from the above quote: http://eab.abime.net/showpost.php?p=...postcount=3108 ;)

profo 03 February 2021 12:45

Please have a look at my Screenshot, there is no "Host" to click on. :crazy
The directory isnt shown, so there no way to select it. :lol

Could someone confirm this?
I already downloaded the latest Version here https://download.abime.net/winuae/re...WinUAE4400.zip, inserted an empty winuae.ini and startet the winuae.exe to verify.

Testet on 2 PC´s, none of them have the "Hosts" in the config window shown. :shocked

DamienD 03 February 2021 12:59

<sigh>

Please look closely at my screenshot here: http://eab.abime.net/showpost.php?p=...postcount=3108

See the bold text i.e: Settings, Hardware and finally Host.

Click on Host and follow the instructions :p

DamienD 03 February 2021 13:10

Quote:

Originally Posted by profo (Post 1458730)
I already downloaded the latest Version here https://download.abime.net/winuae/re...WinUAE4400.zip, inserted an empty winuae.ini and startet the winuae.exe to verify.

No need to use the .INI file, but if you do make sure you use my one here: http://eab.abime.net/showpost.php?p=...postcount=3125

profo 03 February 2021 13:10

:banghead

so you meant the menu point "Host" in the left tree, not the directory "Host" shown on the right side where one can select a config. Goddamn... :laughing:banghead





HEUREKA! :D

DamienD 03 February 2021 13:13

Quote:

Originally Posted by profo (Post 1458740)
HEUREKA! :D

Ok, so is it working as expected or do I need to tweak?

profo 03 February 2021 13:19

Cant test it right now, but i guess it will work.
If not i can edit the file. No one will believe it, but i am capable to do so. :D
Should be a copy&paste job.

thanks for your patience :D

i just coudnt tell from your screenshot that "Host" on the left was selected. :D

edit
got that laptop online, downloaded and copied tje .uae inzo the host directory, started winuae and.... no sign of the new file.
restarted the whole laptop and... no sign..
:D

DamienD 03 February 2021 18:31

Quote:

Originally Posted by profo (Post 1458747)
got that laptop online, downloaded and copied tje .uae inzo the host directory, started winuae and.... no sign of the new file.
restarted the whole laptop and... no sign..
:D

You're saying you cannot see the file "Speedlink Competition Pro" under "Host", and also this has been set via ticking "Autoload"?

Or are you saying you can see all of the above but it's not being injected when launching any normal configuration file?

Anyway, I'm leaving the office soon... it's possible I missed some lines so will go home, set my Xbox 360 wireless controller in Port 2, adjust buttons, work out the exact lines required, test and then finally mimic from your config.

profo 03 February 2021 18:43

I couldnt even select the file to point to it, it didnt show up on the right side, the other 3 or 4 host-configs were available.
maybe it is cached somewhere...?

DamienD 03 February 2021 19:21

Quote:

Originally Posted by profo (Post 1458830)
I couldnt even select the file to point to it, it didnt show up on the right side, the other 3 or 4 host-configs were available.
maybe it is cached somewhere...?

Then to me you haven't done something correct...

Let's write this step by step:
  • Download the archive "Speedlink Competition Pro.zip" from The Zone!
  • Extract this into "C:\WinUAE\Configurations\Host".
  • Start WinUAE.
  • Click "Host" --> "Speedlink Competition Pro".
  • Click "Set", tick "Autoload" and then "OK".
https://i.imgur.com/BsTihif.png
I've also looked at my "Speedlink Competition Pro.uae" file, it was correct previously although I added 2 lines that were not necessary... have now removed, re-uploaded...

So all should be good; please test and let me know ;)

Basically all you should have to do after the above has been done correctly is just double-click on any normal configuration files and those Speedlink Competition Pro settings you customised should be injected.

Toni Wilen 03 February 2021 19:26

It probably would be good idea to have few "custom" gameports options that are stored in profile (instead of config file) but doing it that way would most likely result in other unexpected issues without better planning..

profo 03 February 2021 21:35

@DamienD:
Well, whatever you have done, it worked.
After downloading again and extracting the file into "Configurations\Host" i could select it from the list and "set" it to "autoload". This was still there after restart of WinUAE. :bowdown

@Toni
Some sort of general settings for controller which are "there" for every configuration (once edited and saved) would be nice. I used only a customized, saved Quickstart A500 config before (yes, just one) and it worked too, but Damiens Collection is just so good... :D

DamienD 03 February 2021 22:17

Quote:

Originally Posted by profo (Post 1458871)
@DamienD:
Well, whatever you have done, it worked.
After downloading again and extracting the file into "Configurations\Host" i could select it from the list and "set" it to "autoload". This was still there after restart of WinUAE. :bowdown

Great news!!! :great

...but more importantly; afterwards when you double-click any configuration file, is your "Speedlink Competition Pro" selected and the custom button changes you made applied?


All times are GMT +2. The time now is 05:38.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Page generated in 0.05018 seconds with 10 queries