Firmware (versions) for Terriblefire abandoned products
Not asking for the firmware files (unless still ok to share), but for the firmware versions that were available for TF boards before Stephen did rm -rf /terriblefire on Github.
I have three boards purchased new from Supaduper and AlenPPC, and one that I got in one A2000 I bought. So, what are the last versions to ever have been available for TF530 TF328 TF330 TF536 and what is displayed in the pre-boot menu (expansion boards page) if the last version is installed ? |
Perhaps you missed it but he kindly put the binaries repo back up:
https://github.com/terriblefire/terriblefire-binaries |
Yes, missed that and discovered that yesterday, but still missing are the latest TF536 firmware with the A2000 fix. Also, the summary requested in my post is still useable (current/last/final version and what the board info screen says if that firmware is installed).
|
for the TF328 and TF330 I have put the versions below, I do not build the TF530 or the TF356 so Allen can fill those in :)
Quote:
|
so, so far only old versions were added back to the terriblefire-binaries repo (v41 for TF328 and unknown version for 330, 2019-03-18 alpha)..
|
TF536 firmware still available on this thread:
https://www.exxoshost.co.uk/forum/vi...2001&start=100 |
+1 on this, the TF330 has several firmwares that needs some explanations.
For example, : the version that fix the NVRAM SAVE PROBLEM the version that fix the DISABLE problem the Burst version (seems to be the V3 that supaduper is mentionning) the akiko fix version Some are dispatched all over the exxoshost thread and, in my opinion, it's difficult to find the right one (and doesn't seems to be in the github repo) |
TF330 V3 is the Bust with NVRAM fix combined :)
Quote:
|
Quote:
Now if i want to update for the NVRAM Save fix, wich one shoud i use from the repo ? tf330_2019_02_28_alpha.zip tf330_2019_03_16_alpha.zip tf330_2019_03_18_alpha.zip Wich one is the V3 ? |
Here is a link to my v3 NVram fix
https://mega.nz/file/Y8pD3QDZ#yc9J1f...FANIai7C0-DIU0 Quote:
|
Ok, thanks for clarifying that
I just have to replace the .jed in your raspberry image and follow your tutorial again, nice Is the disable function working with another update, or is it still not ready ? Would be nice for games that have problems with fastram, but i'm not sure it will available soon |
Disable is not fixed yet
Quote:
|
Quote:
|
Quote:
Look at supaduper posts and links ( post 5 & 6 on that page) There was a video before , showing in detail the dupont cables setup but it seems it's not available anymore ........Stephen has made it private, and i have no backup of this video |
I have Stephen's video, but won't pirate it (to prevent him doing rm -rf /exxoshost if I do).. There is however a similar other video available:
https://www.youtube.com/watch?v=UBZAvwKSrM4 |
Nice, this one helps with cables connections too
|
Also, somewhere in this video, starting from the time in the link:
https://youtu.be/F-SrlT-caA8?t=2540 |
@supaduper
Does your V3 firmware fix Akiko C2P in hardware too ( no need of AkikoFix from nibiru ) ? |
Quote:
https://www.exxoshost.co.uk/forum/vi...hp?f=70&t=1716 |
Quote:
|
All times are GMT +2. The time now is 10:06. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.