Payback CD audio setup
 

I'm trying to configure Payback CD Audio but it doesn't work.
Device: I've typed CD0 here,
Unit number: I've typed 1 here.
Is it correct?

My config is A1200+68040+AGA and AsimCDFS.

You can check if its right device with the Asim tools, I dont remember the name but you get all devices and what unit it is connected to, its on the floppy.

You need to describe what Device to use so try e.g. "scsi.device" or "atapi.device" etc...

My device is asim_atapi.device but I can't type _ in the "Payback" CD configuration (!).

If it is a IDE cdrom connected, use scsi.device -- But this you will see when you run the tools from the Asim disk, device and id number...

I've just found update for Payback and it should fix my problem.