Ami-Pc link up software
 

hello all,

Does anyone have the Amiga ADF for this ?

its for parallel to pc file transfer

for some reason mine has the workbench install disk copied on to it :confused

cheers

The name of the software is AMI-PC LinkUp

AmigaLink 2.0 ? if not, what is the exact name of the software?

sadly not , that seems to be a diagnostic software but thanks

it seems it was originally on floppy but later versions are CD

it is some kind of networking software, but from the readme, used to have import/export resources (folders) between amigas.
so not the one, hmm.

there is Link-It 1.0a. this one?
I put this in the zone: Link-It_v1.0a-Intensity.dms

i'll have look.

nope not the one , good try though. you have found more than i did

this is the kit

https://www.amazon.co.uk/AMIGA-PC-LI.../dp/5666000144
http://www.madgerbil.com/software/am...-pc-linkup-kit

I cannot find the software.
maybe this is just a commercial version of this Aminet tool:
PC2Am308.lha PC<->Amiga Ser/ParNet-like filesystem
PC2AmFix ( a fix for the above version ).
the parallel cable you still have? then you should take a look to this aminet software.

thanks , I'm currently trying that but I've stopped to play sensi soccer

ok, just give it a try later :)

#1) you can also try LinkIt , it does work with serial or parallel cable connections.
the LinkIt Pc software could be a problem. it does work on my emulated WinNT4 system- but not on my Win7 64bit system.
just give it a try too.

I'm sure I have this software. :great

From memory, I think it consists of a PC CD-ROM and diskette. There may also have been a link-up cable supplied with it or else I built it myself.

I'll try and seek it out for you. :)

your a star , i have the cable and the PC floppy but the Amiga floppy has been overwritten at somepoint

So far, I have found Just the PC CD-ROM. A bit more searching might find me the floppies and cable as well, but you will see that I don't need them to be able to help you.

I have attached a listing of the PC CD-ROM directory for you to look at.

Note the two files AMI-PC.ZIP and AMI-PC3.DMS.

The zip file contains the files which should appear on the PC floppy disk, and the DMS file is a disk image of The Amiga floppy.

I have converted the Amiga floppy image to ADF and will upload both this and AMI-PC3.ADF to The Zone for you now.

The files within AMI-PC.ZIP you can write to a floppy disk and use with your PC if they differ from those on your PC floppy, and the AMI-PC3.ADF disk image can be written to a floppy and used in your Amiga. Complete the AMI to PC linkup with your cable.

PS. If you are unable to write the ADF image to floppy disk, PM me your address and I will post you a ready made Amiga disk to complete your setup. :)

any chance you may zone both disks/archive ?

Already done. ;)

ah, cool, thanks :)

brilliant thank you :-)