Workbench 3.0/3.1 + Voodoo3
i'd like to create a small workbench system with voodoo 3 card in few MB (maxium not more of 20 MB).
I don't remember the procedure to install Voodoo3, so what are step by step the procedure? 1) 2) 3) 4) ... etc |
Maybe this helps: https://github.com/Mediators/UnreliableGuide
|
i forget to say: i need for WinUAE
|
Install the OS.
Install Picasso96 for Cybervision64/3D copy pci.library to Libs: and Voodoo.card to Libs:Picasso96. go to Devs/Monitors and rename CVision64 to Voodoo. Open icon information of Voodoo and change tooltypes to BOARDTPYE=Voodoo. Double click Voodoo. Run Prefs/Picasso96Mode and create some Voodoo screen modes. Attach settings to Voodoo (that's in the right-click menu). When you save settings it will ask you to reboot. After the reboot run Prefs/Screenmode to select one of the new screen modes. |
very good, thank for this step by step guide
in prefs/picasso96 in attach board says: "no board" and every other panels is closed. in WinAUE 4.10.1 is it necessary to use voodoo3.rom or it is already integrated? edit: if i setup again picasso96 install i change monitor to 31khz it found a unknown graphics board. i rename it in voodoo. But it continue to say that in Attach Board there is nothing. |
Have you added PCI bridgeboard on WinUAE Expansions page?
|
mmmh. no.
I had installed voodoo3 emulation many time ago and not more remember any step. i try again. edit: tried and works, but after loading workbench becaome all black screen. i remember that i shoudl press some keys to choose from PAL and 3dfx or something |
Quote:
|
Quote:
|
installed in the end all ok, but when i try to launch every GL games i have HALT3 or crash on every software.
the config is A1200, 68040, 128 MB, no jit and Mediator A1200 driver in 2D it is ok, no problem |
working fine in 4.9.1, can't get it to work in 4.10.0 :crying
Like you say the 2d stuff seems fine but 3d programs (while they don't crash or halt the emulator) do not open, I can see the memory being used but nothing is displayed. you should probably ask in Support/WINUAE |
cybervision3D emulation is working with winuae 4.10 so don't know what changed to stop voodoo working
|
i resolved: WinUAE 4.10.1 with A4000 + MEdiator A4000 MK2 in OS3.9. Voodoo3 run good also with Warp3D.
|
strange, I have a very similar setup but it will not open warp3d stuff in 4.10.
could you post your config so I can compare? |
Code:
config_description=UAE default configuration |
@Seiya
Thanks, I will try this later :great |
@Seiya
I noticed that you configured an A4000, but you used a "Generic ChipSet" instead of the A4000 ChipSet. To configure an A4000, you can do it correctly by choosing the 4000 from the QuickStart, this is important if you want an authentic A4000. |
if you read better, it's written A4000 chipset
|
Seiya I went through the config you attached, you don't have to read the script, but you have to see it from the GUI, if you run the config you attached you will see in the ChipSet section "Generic", see screenshot !
|
All times are GMT +2. The time now is 15:30. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.