Just got me an A500+ :-) with no bits :-(
Hell, it's stained a dirty yellow and the expansion board is held in with blue tack.
So, I need to bodge together a power supply - any know the pin configuration?? I've got an ATX supply in the shed that might do the trick. And a mouse. And a lead to connect it to a TV or monitor. Thanks for some URLs!! What am I going to do with it when I get it going? :confused |
Look in the 'hard/hack' directory on www.aminet.net for lots of DIY adaptors. Very good sounding mouse adaptor - ps2m.lha (requires a PIC chip)
You'll find lots of cable pinouts on www.hardwarebook.net (pretty sure they have Amiga power connectors) Connecting to a TV... If your TV has RCA connectors for A/V in, then you can just connect directly via those cables from the Amiga (I believe?) Otherwise, get a co-ax aerial cable, cut off the end that doesn't connect to your TV, & replace the plug with a RCA. Plug that into the Amiga, then tune the TV to the right channel (something in UHF). |
Considering the fact it's an A500+, did it come with an A520 Modulator? (would be written on it) else you need to buy one or buy a RGB to scart cable else you wont be able to see anything.
|
All times are GMT +2. The time now is 21:06. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.