English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.Apps (http://eab.abime.net/forumdisplay.php?f=8)
-   -   Warp3D issues (http://eab.abime.net/showthread.php?t=97884)

iRonNuke 26 June 2019 19:05

Warp3D issues
 
Hi I have a Cybervision 64/3D, and what I have understood could even Cybervision 64/3D use Warp3D, correct me if I'm wrong. I'm running AOS 3.9, have Cybergraphics 3.x. No problems when installing Warp3D for CGFX 3.x.

But, when I'm running the included demos, it crashes. WarpTest says there is no driver available. Even like ADescent for Warp3D crashes. What am I missing?

Thanks for help!

DofD 26 June 2019 19:41

The Warp3D 4.2 package on Aminet says it has the driver (Virge) and supports the CV3D. I would check that you have the W3D_Virge.library installed.

iRonNuke 26 June 2019 19:46

Quote:

Originally Posted by DofD (Post 1329398)
The Warp3D 4.2 package on Aminet says it has the driver (Virge) and supports the CV3D. I would check that you have the W3D_Virge.library installed.

Yes both W3D_Virge.library and W3D_CyberGFX.library are installed in Libs:Warp3D. But is that enough? Will it just access the files when it launches a Warp3D app?

DofD 26 June 2019 20:12

It should find them okay. Did the installation of Warp3D go okay? No errors?

You could try this in your startup sequence to see if it helps, if it's not already there.

assign libs: sys:libs/Warp3D ADD

iRonNuke 26 June 2019 22:30

Quote:

Originally Posted by DofD (Post 1329404)
It should find them okay. Did the installation of Warp3D go okay? No errors?

You could try this in your startup sequence to see if it helps, if it's not already there.

assign libs: sys:libs/Warp3D ADD

I tried that now, and checked with Assign that it was added. But still the same thing. I ran Snoopdos and it seems that it loads both cybergraphics.library (Ver 0) and Wark3D.library (Ver 2) when I try a Warp3D app, but with results OK.

My cgxsystem.library is v42.1
warp3d.library is v4.2
W3D_CyberGFX.library is v4.0
W3D_Virge.library is v3.0

Thanks for the help though!

DofD 27 June 2019 00:42

It sounds like a config thing with Warp3D and what driver to use. Unfortunately I don't CGFX or Warp3D to check further for you.

iRonNuke 27 June 2019 16:57

Quote:

Originally Posted by DofD (Post 1329457)
It sounds like a config thing with Warp3D and what driver to use. Unfortunately I don't CGFX or Warp3D to check further for you.

Thanks for the help anyway! :)

Cowcat 28 June 2019 09:01

Besides low Virge memory: The need of full cybergraphics driver 4.x (not 3.x) and warp3d version settings (v3 or v4). I don't remember if last warp3d needs latest cybergfx or by the same token old test warp3d programs were compiled with those in mind .


All times are GMT +2. The time now is 22:00.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.

Page generated in 0.04184 seconds with 11 queries