English Amiga Board

English Amiga Board (https://eab.abime.net/index.php)
-   support.Hardware (https://eab.abime.net/forumdisplay.php?f=20)
-   -   Cnet driver and netgear FA410TX ethernet card not working (https://eab.abime.net/showthread.php?t=64565)

melbourneben! 05 June 2012 01:11

Cnet driver and netgear FA410TX ethernet card not working
 
Hi All,

I recently bought an FA410TX PCMCIA ethernet card for my A1200 (1D4), I've previously used a netgear wifi card (Prism2) on my A1200 which worked without problems with amitcp 3.02b and Miami Deluxe.

A few nights ago I tried the FA410TX with Miami and Amitcp and I whilst I could ping the NIC I wasn't able to ping the gateway. I tried cnet versions 1.9 and 1.8 drivers and both behaved in the same way. Neither Amitcp or Miami generate an error message, in fact Miami states 'online', yet I still can't ping the gateway. If I switch back to my wireless pcmcia card the same TCP/IP configuration works ok, also I have tried a Wintel laptop in the same ethernet socket on the router and that works ok, so it all points to a problem with the card or driver.

Interestingly the card detection program that comes with the driver can identify the card correctly and all 3 lights on the dongle flash every few seconds but I never get a steady link light. I have tried running the debug driver and the log looks ok apart from 1 line that states 'romstationaddress probably incorrect' but then on the next line the romstationaddress is stated in hex format. I can post the log here if anyone thinks its worthwhile??

I just wondered if anyone has seen these types of problem before and could offer any suggestions? The card is listed as compatible and tested on Cnet driver webpage.

Many thanks

Ben

spannernick 18 May 2016 12:36

1 Attachment(s)
Hi I know this is old but I was thinking of getting this card for mine,its sound like it don't work on A1200 motherboards with 1D4 on them,can someone post if they have got this card working in there A1200 and what version there board is please..I don't want to buy the card and then find its a paperweight...;) any info about it will be great..

This is it.. http://www.ebay.co.uk/itm/Netzwerkka...vip=true&rt=nc

Jope 18 May 2016 14:12

Did you also try it with the cnet16.device in the same package?

spannernick 18 May 2016 21:02

I have not bought one yet,just finding out if I can use it,my board is a 1D3 so it might work.I don't know.


All times are GMT +2. The time now is 08:58.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Page generated in 0.12057 seconds with 11 queries