Amiga 500 Burned
 

Has i said before, i'm recovering 2 Amiga 500(Motherboard rev 6A both) and an Amiga 1200 that my brother left to be killed by moister.
Well it started about a month and a half ago and yesterday one of the 500's burned a little bit:crying. I Guess it was the mold.
As you see in the picture i've desolder the problem from the board.
http://www.colegiodapaz.com.pt/cbm/queimou1.jpg http://www.colegiodapaz.com.pt/cbm/queimou2.jpg

O guess this one was somehow conected the the mouse port because while i was working with him the mouse started to fail and a little after there was smoke everywhere.
Now i'm praying that it didn't damage anything else.
It made me very sad. :( Now i'll just try to buy another one and soldered it back to place.
Just stop by to cry on the shoulder of this forum:crying:crying:crying:crying

:(

Hope there's no long term harm done and that you get it fixed. :)

I´ve just bought the replacement and now i'll solder it to the board:)
Let's pray for it to work.

paulo_becas : 47 Ohm / 0.5 Watt - ( R401 ). OK ?

The Rev 6a schematics I have list R401 as a 4.7 ohm 1/2 watt part. Could someone with a 6a board can confirm? R401, R405, R406, and R408 are all the same in my schematic, so you could look at those too.

Pics are from revisions labeled. It's a 4.7 Ohm .5W
Hope this helps...

It's Rev6A A03, i've just soldered it back and it's working fine now, thank god:D.

Thank's for the help

Another Amiga healed! :great