English Amiga Board - ClassicWB OS3x (requires a full OS3.5/9 HDF install)

PLEASE NOTE:

In order to use this Workbench, you MUST follow the install procedure provided.

You'll need a valid OS 3.5/9 install updated with Boing Bags 1 and 2, without one this pack will fail.

Vital and copyright files contained on the 3.5/9 install will be copied during the installation.

This is required because Workbench is still sold commercially.

The copyright holders can be found at http://amigaforever.com/

FEEDBACK and GUESTBOOK

SUPPORT FORUM

OS35 INSTALL INSTRUCTIONS AND DOCUMENTATION
OS39 INSTALL INSTRUCTIONS AND DOCUMENTATION

DOWNLOAD FROM THE MAIN CLASSICWB SITE - Hosted by RCK

Update Status

26th December 2015 - Packs Updated. Main changes:

Please read here for update details Version Info: v28u2

6th October 2013 - Packs Updated

Please read here for update details Version Info: v28

Due to a large number of requests, I decided to put together OS3.x versions of the ClassicWB. These versions have advantages and disadvantages:

Advantages:

Native support for hard drives greater than 4GB including updated HDToolbox
GlowIcon support – see this thread for details
Most recent OS and files for Classic Amiga hardware

Disadvantages:

No Scalos and the advantages associated with this system
No context sensitive popup menus
More resource and memory hungry compared to the Workbench 3.0/1 versions

I strongly advise that users try the Classic 3.0/1 versions first, especially if you have a lower end Amiga. The 4GB limit can be lifted on these older Workbenches by reading this thread for details.

.