English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   News (http://eab.abime.net/forumdisplay.php?f=29)
-   -   WinUAE 3.6.0 (http://eab.abime.net/showthread.php?t=90313)

Toni Wilen 19 January 2018 09:21

WinUAE 3.6.0
WinUAE 3.6.0 (17.01.2018) released. http://www.winuae.net/

Core emulation updates:

- 68030, 68040 and 68060 full instruction and data cache emulation, with or without MMU emulation.
- 68030, 68040 and 68060 EC model partial MMU (transparent translation registers only) emulation.
- 68030, 68040 and 68060 MMU emulation performance improved (added extra translation caches).
- STOP-instruction CPU model specific undocumented behavior emulated when parameter does not have S-bit set.
- 68020+ DIVS/DIVU CPU model specific undefined overflow condition N and Z flags emulated.
- Undocumented 68881/68882 FMOVECR values emulated.
- 68020/030 BCD instructions undocumented V flag behavior fixed (68000 was already correct)
- Optional Toshiba Gary slow (chip ram like) Z2 IO and/or ROM space access speed.

Emulated hardware expansion updates:

- Added Cubo CD32 later revision hardware support, PIC copy protection, touch screen, NVRAM and RTC emulation. (TODO: Coin and ticket dispenser support, no hardware information available)
- Cubo CD32 is now an expansion device, added DIPs, PIC game ID/language and expansion device enable options.
- A2090 Combitec and MacroSystem 3rd party ROM update/adapter supported.
- DKB 1230/1240/Cobra and Rapidfire flash rom write support added.

New emulated hardware expansions:

- Ashcom Addhard (SCSI)
- Evesham Micros Reference (SCSI)
- FastATA 4000 MK I/II (IDE)
- Gigatron Arriba (IDE)
- Kupke Golem HD3000 (OMTI)
- Profex HD3300 (OMTI)
- Reiter Software Wedge (OMTI)
- Sprit Technology InMate (SCSI)
- Music Master dongle

Direct3D 11 support implemented:

- Requires Windows 7SP1 and later. Windows 7 requires KB2670838 (Available via Windows update as an optional update), Windows 8 and later does not need any extra packages like D3D9 support required (Ancient DX9 redistributable).
- Requires hardware level 9.1 or higher, which means most Windows 7 capable GPUs are supported.
- All Direct3D9 mode features supported (overlays, masks, custom shaders)
- Variable sync (G-Sync, possibly also FreeSync) supported in windowed mode.
- Many D3D9 custom shaders are supported automatically, some require manual modifications to work in Direct3D 11 mode.

Other new features and updates:

- Simple box art/screenshot config file support.
- If Wait for Blitter is enabled and blit size makes no sense, don't wait. Fixes long delay in Vital / Mystic.
- Added "CIA 391078-01" advanced chipset checkbox. This CIA revision has a bug in IO port output mode, reading output mode port will always read output mode data state. Other models, including original DIP 8520, 391078-02 and Akiko internal CIAs read IO pin external voltage level as documented. This can affect "bad" mouse left button/joystick fire button reading code (not working or stuck button). Used in A600. A1200/A4000 can have -01 or -02 revision.
- Added ATAPI Tape drive emulation.
- CD SCSI emulator READ CD-DA and READ CD-DA MSF commands emulated.
- Expansion device GUI changes are now always activated after hard reset.
- uaehf.device hardfiles/harddrives unit number is now user configurable.
- "Include CD and FMV Audio" and/or sound mode change on the fly when CD or FMV audio is playing is now supported.
- Debugger assembler support (a) and some other misc debugger updates.
- Optional non-rawinput mouse and keyboard mode is back (-norawinput_all)
- Added Misc panel option to show WinUAE in Windows shutdown/logoff screen (Vista or newer) if emulation session is active.
- JIT Direct is allowed in CyberStorm PPC configuration but it also disables CSPPC MAP ROM hardware feature.
- Ability to image CHS-only IDE drives using USB adapters that don't support CHS-only drives. (Common side effect is drive being detected but it appears as zero size drive in Windows Disk Management)

Bugs fixed:

- It was not possible to override Z2 RAM board autoconfig data if board had built-in manufacturer/product ID defaults.
- It was not possible to change existing path with Select Directory/Select Archive or Plain File buttons.
- Fixed 64-bit version random crashes that usually happened with some shell extensions.
- Z3 RAM in manual mode was completely broken.
- UAE directory harddrive/hardfile KS 1.2 autoboot hack didn't work without extra reset if UAE autoconfig board wasn't first board in autoconfig chain.
- 68030 data cache emulation corrupted data if write was cached, write size was word or long and address was odd.
- 68040/060 without FPU: many FPU instruction F-line exceptions generated incorrect stack frames.
- ECS Denise BPLCON2 ECS-only bits (for example KILLEHB) were masked unless AGA was also selected.
- Obsolete IDE FORMAT TRACK command fixed.
- GamePorts panel custom mapping incorrectly parsed joystick autofire state from config file.
- Directory filesystem ACTION_SET_DATE failed to change date stamp if file was read-only.
- 68020 memory cycle exact CPU speed slider is again partially working, CPU speed can be reduced but not increased.
- GamePorts panel custom mapping incorrectly parsed joystick autofire state from config file.
- uae-configuration joystick port (joyportx) modification only queued but didn't apply changes.
- uaeserial.device crash fixed. DTR/RTS state now match serial.device behavior when device is opened.
- Fixed uaegfx VRAM size check, some modes that almost filled whole VRAM didn't appear in resolution list.
- uaenet.device didn't close low level ethernet handles when Amiga was reset, causing duplicate packets.
- Bitplane overrun condition triggered incorrectly in rare situation where bitplane DMA is enabled after DDFSTOP on OCS
- Tape drive emulation fixes. Fixes Amix install error if last file on tape was selected for install.

AVI recording bug fixes and updates:

- First avioutput recorded frame was sometimes partially corrupted.
- When saving state with avioutput active: last frame before state save was not recorded.
- Number of avioutput frames buffered (waiting for compression thread processing) counter was reset periodically which caused lost frames (and leaked memory) in recorded video if CPU was not fast enough.
- Delay initialization until first display frame or sound buffer recording request comes, previously "before filtering" option may have used wrong display size in some situations.
- Uncompressed video selection is not forgotten anymore.
- First frame was not rendered (and also not recorded) if statefile was restored when emulation was already running.
- If emulator state was changed (debugger breakpoint, statefile save etc..), last frame before state change was not recorded.
- File splitting (2G limit) incorrectly flushed sound buffers causing random sound glitches.
- Added -max_avi_size <bytes> -command line parameter to set split size.
- If recording was started and GUI was never opened in same session, sound recording rate become 44100Hz, causing AV syncronization issues if real rate was not same.

and more.

[bug reports in this thread will be ignored]

ransom1122 19 January 2018 09:42

Thanks for an amazing update and for all the AVI recording bug fixes and updates as well. Really looking forward in seeing the changes there. :great

huepper 19 January 2018 10:41

Thank you Toni! :great

DamienD 19 January 2018 10:42


What an awesome release. So many new features / improvements / fixes after 6 months of your hard work (again).

Thank you master Wilen :bowdown :bowdown :bowdown

ma693541 19 January 2018 10:49

Thanks Toni.

Amiga68k 19 January 2018 11:02

Congrats on the release! :cool

honx 19 January 2018 12:45

nice! now i only have to wait for german .dll translation to be available...

Jope 19 January 2018 12:53

Good show!

The CHS drive reading via USB will definitely come in handy in non-amiga related software preservation tasks too. :-)

Anubis 19 January 2018 15:08

Great job Toni! :great

Kitty 19 January 2018 15:53

Excellent work Toni, thank you :D

E-Penguin 19 January 2018 20:39

Amazing, as ever

Zandig 19 January 2018 21:17

Thank you for the continued support Toni.
In my opinion, one of the best emulators ever programmed.

Snake79 19 January 2018 21:18

Great! Keep Amiga alive! and for that Thank You!

AMIGASYSTEM 19 January 2018 21:24

Thanks Toni

Sinphaltimus 19 January 2018 21:25

Ditto all above comments in full CAPS lined with a lot of "!!!!"s.

waldiamiga 19 January 2018 21:31

Thanks Toni. Good work.

Amiga68k 19 January 2018 21:45

Toni, after a lot of testing with the betas it was now time to tinker with the Display settings some more... When I put the Host Display on 50Hz, Native Fullscreen display is working awesome with D3D11 Low Latency VSync: crystal clear 50Hz scrolling madness! :nuts:great A great achievement!

SuperPlay 19 January 2018 22:26

Just a quick post to add my personal thanks yet again for continued development of this excellent emulator :-)

Ian 19 January 2018 23:04

Thanks for taking on WinUAE toni. Who knows where the project would be now without your devotion and expertise.

After years without an update for the Unix build or Windows you came in like a whirlwind and just look at it now.

I cannot thank you enough, please continue as long as it's enjoyable for you.

For me, it's done. I can play everything and anything I want but your continued efforts are greatly appreciated by the entire community.

Thanks again old pal!!!

Sent from my SM-N950F using Tapatalk

jotd 19 January 2018 23:10

one day, there will be more bugs in a real Amiga than in Winuae.

Excellent as always and a million thanks for all the support you're providing on the side for other people projects (like mine for instance). I know I have some tests to provide for the CD32. I'm not forgetting.

All times are GMT +2. The time now is 12:16.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.

Page generated in 0.04371 seconds with 11 queries