English Amiga Board

English Amiga Board (https://eab.abime.net/index.php)
-   support.Hardware (https://eab.abime.net/forumdisplay.php?f=20)
-   -   A2090 Questions (https://eab.abime.net/showthread.php?t=54314)

JACK98 06 August 2010 23:15

A2090 Questions
 
I see some of these on sale on auction sites.however i read that A2090 does not autoboot.but the A2090a does autoboot.has anyone have these A2090 cards.Do they autoboot without a add-on card,or could you have to use some piece of software if hardware not available?.provided link below for anyone not familiar with this card-

http://www.amiga-hardware.com/showha...gi?HARDID=1159

Hewitson 07 August 2010 04:38

I suggest you forget about the Commodore controllers and go for a GVP Impact HC+8 Series II.

Can be picked up cheaply and supports 8mb fast onboard.

Loedown 08 August 2010 14:21

Quote:

Originally Posted by Hewitson (Post 690463)
I suggest you forget about the Commodore controllers and go for a GVP Impact HC+8 Series II.

Can be picked up cheaply and supports 8mb fast onboard.

I'll second that, they use commonly available 30 pin simms (1Mb) and can be set for autoboot or disabled with a jumper. The hard drive can be screwed directly to the card saving your places on the front.

Jope 08 August 2010 18:29

Quote:

Originally Posted by Hewitson (Post 690463)
I suggest you forget about the Commodore controllers and go for a GVP Impact HC+8 Series II.

The A590/2091 is not a bad card at all. The only shortcoming is that it only supports up to 2MB of RAM.


All times are GMT +2. The time now is 06:34.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.

Page generated in 0.04834 seconds with 11 queries