English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   project.WHDLoad (http://eab.abime.net/forumdisplay.php?f=63)
-   -   State of the Art demo and exit crash (http://eab.abime.net/showthread.php?t=70920)

ShK 26 September 2013 20:00

State of the Art demo and exit crash
WHDLoad crash for some reason, when the exit key (F10) is pressed. This same exit crash happens with WinUAE and real Amiga.


Has anyone got WHDLoad exit to work properly on WinUAE or real Amiga? What file version and settings is used?

johnim 26 September 2013 20:02

i get that too but not really bothered

ShK 27 September 2013 08:02

Thank you for your confirmation. I was thinking that if it's just me again. :D

But, I would really like to get this to work... :help

Bamiga2002 27 September 2013 08:26

Does it also happen with latest WHDLoad 17.2 beta?

psygnosis 27 September 2013 09:32

Me to i get it but doesnt bother me as the demo works fine

ShK 27 September 2013 20:09

Yes, demo works, except for the exit. 17.2 beta will do the same thing.

Enabling MMU gives little bit different exit error:


Memory protection in WHDLoad

On startup, WHDLoad scans the memory list and will build a translation tree which includes all accessible memory. It marks the following address spaces as valid and accessible: $0...BaseMem (using the information from the Slave), $dff000...$dff200 (Custom registers), $bfd000...$bff000 (Cia registers) and the memory used by the Slave and WHDLoad. If a Freezer is found in memory, the memory used by the Freezer will also be marked as valid. All other memory is marked as invalid, and therefore every access to such an area (Read or Write) will create an Access Fault Exception which will end in an appropriate error requester created by WHDLoad.

ShK 28 September 2013 07:56

The files that I used:

WHDLoad + beta

Install file

The two versions of the State Of The Art Demo - ftp.funet.fi

Wepl 28 September 2013 14:30

I'll fix this. Will also add support for the SkidRow modified version.

manic23 29 September 2013 02:09

Excellent news, many thanks in advance for the update Wepl, I asked this same question back in May, I guess no one loves me... sniff.... :crying

ShK 01 October 2013 16:02


Originally Posted by Wepl (Post 913685)
I'll fix this. Will also add support for the SkidRow modified version.

Nice to hear! :) It looks now something like this: https://vimeo.com/75417563

Wepl 09 October 2013 23:01

updated install has been released

manic23 10 October 2013 09:41

Splendid news, many thanks for your hard word Wepl

ShK 10 October 2013 17:32


Originally Posted by Wepl (Post 915814)
updated install has been released

Confirmed to work! Thank you Wepl, it was quickly done. :)

All times are GMT +2. The time now is 00:19.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.

Page generated in 0.04600 seconds with 11 queries