PPC crashes when WHDload is started
 

I have the following problem with 17.0 and 17.1 registered:

During the first run of a WHDLoad game (any) I get a WarpOS PPC exception. I can then start it again and it usually then works. When I quit the game I cannot start another (nothing happens).

Is there some WarpOS setting?

Setup:

A4000D in Mirage tower with Mediator 4000D
Cyberstorm 50 MHz 060, 200 MHz PPC 64MB
OS 3.9 with unofficial BB4
WarpOS 16.1
Radeon 9200 256MB using P96
NEC USB card (disabled before WHDLoad use)
100 mbit fast ethernet card
SB128 (i think CT4750, could be ES 1371)

I think only PPC software which is running at the start is WarpDT.

Same software, slightly different hardware (Apollo 040/040 & Voodoo) is working with WHDLoad on my A1200.

Thanks if anyone can help me solve this.

check using SnoopDos which libraries/devices are loaded by the first start of whdload.

The various libs/devs, in parenthesis the version used:

WHDLoad OpenLib workbench.library Ver 0 OK (45.131)
WHDLoad OpenLib graphics.library Ver 37 OK (40.24)
WHDLoad OpenLib intuition.library Ver 37 OK (40.88)
WHDLoad OpenLib gadtools.library Ver 37 OK (40.4)
WHDLoad OpenLib keymap.library Ver 37 OK (40.4)
WHDLoad OpenLib utility.library Ver 37 OK (40.1)
WHDLoad OpenDev timer.device Unit 0 OK (39.4)
WHDLoad OpenLib expansion.library Ver 37 OK (40.2)
WHDLoad OpenLib lowlevel.library Ver 40 OK (40.35)

WHDLoad Open S:whdload.prefs Read
WHDLoad *Open S:whdload.prefs Read OK
\WHDLoad Open S:whdload.prefs Read OK
WHDLoad ChangeDir GamesZakMcKracken
WHDLoad OpenLib icon.library Ver 34 OK (53.4)

Some CGX stuff? I use p96:

WHDLoad GetVar CyberGraphX/56KHZAUDIO Global
WHDLoad *Lock ENV: Read OK
WHDLoad *Open CyberGraphX/56KHZAUDIO Read Fail
\WHDLoad GetVar CyberGraphX/56KHZAUDIO Global Fail

Loading Key and then fail:

WHDLoad Open S:WHDLoad.key Read
WHDLoad *Open S:WHDLoad.key Read OK
WHDLoad Open S:WHDLoad.key Read OK
[13] Workbench *Lock : Read OK
Defiant Open CON:0/20/400/300/WarpOS - PowerPC Exception/AUTO/CLOSE/WAIT/INACTI Write

Took a while, but I found the culprit.... removed Loadlib ppc.library from the user-startup (ppclibemu from Frank Wille).

It all works happily now :-)

Strange, ppc stuff shouldn't collide with WHDLoad in any way. Never had similar prob on my setup.

Its the way some version of loadppclib work that causes probems. The only good one that I remember is the one that comes with frogger (installppclibrary). If you dont run ny PowerUP software however, you dont need to worry about it.