English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.Hardware (http://eab.abime.net/forumdisplay.php?f=20)
-   -   green wire is solder on my A1200 Motherboard?? (http://eab.abime.net/showthread.php?t=20113)

BarrySWE 23 September 2005 23:46

green wire is solder on my A1200 Motherboard??
 
http://hem.bredband.net/andthr/greencable.jpg

What is this for? som kind of "VOLT MOD"?

RetroMan 24 September 2005 08:53

It´s no "mod" ;)

Many mainboards were tested from C= back then and some need rework like yours ....

BarrySWE 24 September 2005 09:52

Quote:

Originally Posted by RetroMan
It´s no "mod" ;)

Many mainboards were tested from C= back then and some need rework like yours ....

ahha... :)

BippyM 24 September 2005 16:54

remove it and you'll see :P

BarrySWE 24 September 2005 17:02

Quote:

Originally Posted by bippym
remove it and you'll see :P


No way ;-)

but i have to give the motherboard one more component. the flickering issuie on early a1200 motherboards :(

Chain 24 September 2005 22:18

1D1 HMMMMMMMM :)
dont touch it!

BarrySWE 25 September 2005 13:15

Quote:

Originally Posted by Chain
1D1 HMMMMMMMM :)
dont touch it!


1D.1 seems to suck big time with this "BUG" =)

BippyM 25 September 2005 14:11

my original 1200 was a 1d.4 and I used a magnum 040/25+32mb for a looong time without it crashing!

I think there must be a few 1d.4s that didn't have the timing problems!


All times are GMT +2. The time now is 10:12.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.

Page generated in 0.04133 seconds with 11 queries