English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.Hardware (http://eab.abime.net/forumdisplay.php?f=20)
-   -   Indivision Mk2 A1200 And Now No Turn On :D (http://eab.abime.net/showthread.php?t=67196)

Yushatak 31 December 2012 01:39

Indivision Mk2 A1200 And Now No Turn On :D
 
Bought A1200. First Amiga, excited. It's a UK model with a UK PSU, so I bought a converter and such. I have no monitor, so I bought an Indivision Mk2 and while I waited, I hooked it up to my CBM 1701 and got a shitty fuzzy cut-off black and white picture of it and had it boot to workbench, so I knew it was in working order.

Indivision arrives. I installed it following directions, grounded properly etc.. Amiga won't turn on. No power light.. I remove the ground, Amiga won't turn on. I remove the Indivision entirely, and Amiga won't turn on. Nothing smells burned, no obvious signs of anything bad... it just won't turn on.

This has the original A1200 PSU so my guess is somehow the Indivision was enough to overwork and kill it?

diablothe2nd 31 December 2012 12:57

Quote:

Originally Posted by Yushatak (Post 858684)
This has the original A1200 PSU so my guess is somehow the Indivision was enough to overwork and kill it?

My thoughts too, unless you put the indi in the wrong way around which I doubt you have as it's pretty self explanatory to fit.

Have you got a multimeter to test the 12v and 5v lines?

Welcome to Club Amiga :great

edit- also check the fuse in the psu plug, as it may have blown from old age.


All times are GMT +2. The time now is 14:03.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.

Page generated in 0.03967 seconds with 11 queries