Help with PFS3 on CF
Need some assistance please :)
Trying to setup a 16GB CF card for my A1200 rev 1D4 with 3.1 ROMs. I followed the guide here: https://16bitdust.wordpress.com/2015...nuae-and-pfs3/ I have partitioned the card into a 1024MB partition for DH0, and the remaining space as DH1. installed PFS3 on both partitions and then installed latest version of ClassicWB ADVSP. Everything works fine in WinUAE but when I install it into my Amiga I get the below error on boot: https://i.imgur.com/d3YxAJjl.jpg If I click OK I get told there is no disk in DH0, and eventually after continuing to click OK I get dumped to a CLI prompt. I can't open either DH1: or DH0: - it just asks me to insert it into any drive. I am using scsi.device 44.2 and placed it in the DH0 DEVS folder. Here's what sysinfo says about DH0: https://i.imgur.com/I26l4L0.png Here's HDToolbox settings: https://i.imgur.com/vIW4eRE.png https://i.imgur.com/1r71VHi.png Any assistance would be appreciated :) |
Quote:
|
Thanks so much, that fixed it :great
|
All times are GMT +2. The time now is 16:10. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.