i'm interested too :) (email sent yesterday)
bye!

hi thread,

I'll have some more ready tomorrow/Tuesday, I'll pm when ready

Still waiting for mine... Hopefully tomorrow or tuesday..

:nervous The same for me....

Waiting for PM when stock is ready... thanks!

Hi Kipper,
Just received it, thanks. I tested the joypad mode, it works fine.
Great job ! :great

Glad to hear, I'm down to 3 chips so waiting for next batch later this week and then i will start the next batch. and also the CD32 adapter will be hopefully ready to go.

@lolafq, did yours arrive ?

Fantastic news on the CD32 adapter, do you have an order list for these... if so how do I get my name on it :)

Hello Kipper2k , it isn't arrived yet , perhaps on tuesday , i'll let you know.

Mine arrived today. Only given it limited testing but it works great so far, cheers.

kipper2k

Is the for the Amiga only or will it work on the Commodore 64? I am seeing really if it is Shredz64! compatible.

check out the link to the pdf in post 1 for all its capabilities

i already use two of this adapter on my A1200, and i'm very happy with it.

But this week i plugged one in my A500+ .. and surprise... one of 2 resistors near the joy connector started to burn with a white smoke... :shocked

re-plug my Speedking Joystick, no prob all is working...

re-test : psx-adapter.. re white smoke... STOP.. and i don't know why i can't use it in my A500+ :crying

Are you saying it works ok in the A1200 but causes smoke in the 500+ ? If you have an Ohm meter measure resistance across pins 7 and 8 of the adapter and see if you have a short, also measure pin 7 to the steel casing to see if there is a short there.

Exactly !

Will test with my Multimeter after work to see what happening...

thx :)

I have found two Playstation2 pads at home. Will these work with them?

That is bizarre, i cannot see any logical reason why this would happen, if it was shorting out in the A500+ then it would do the same in the A1200. Also, does the Speedking joystick have a plastic 9 pin connector or metal, if plastic then plugging it in may not cause a short, whereas the PSX adapter does have a metal plug, this could indicate a problem with the A500+ motherboard


@Ancalimon. the PS2 controllers will work fine as long as they are not wireless.


I'll be making more this weekend so i will go back through the requests in the thread

Still haven't received my 2 psx-adapters... Hope they aren't lost :(

Nothing between 7-8 and nothing between 7 and all 9 pins from DB9..

Where is supposed to be connected ?

I would like two please.