2091 ROM Image (Version 7)
 

I purchased two four GB SCSI hard drives on Ebay without realizing that I needed version 7 ROMs on the 2091 in order to see the drive properly (I currently have version 6.6 installed on the 2091 card). My friend lent me his EPROM burner and I figured that I could just erase my 6.6 ROMs and then burn the 7.0 ROMs. The only problem is, I've been searching the Internet for a couple of days and I can't find the 2091 version 7.0 ROM images anywhere. Does anyone have a copy that they can email me? (Or is there an area on this message board to post temp files like this?)

Thanks!

Adam

in the zone

Thanks!

Adam

Out of curiosity would these ROMS be compatible with an A590?

Yes!

Someone please verify whether this works with DMAC-1, or does it need the DMAC-2?

I remember messing around with A590/2091 ROMs and at least V6.6 seemed to require the DMAC-2.. :-)

can someone post the roms again in the zone?
i upgraded my harddisk & kickstart and it doesnt boot anymore.

I used to repair Amiga's back in the early 90's (Video Toaster systems, mostly) and I seem to recall that 7.0 was unstable. I distinctly remember downgrading the EPROMs back to 6.6 whenever we got new cards in. I couldn't begin to remember what the issue was, though.

Some random information:

I have confirmed 6.x versions don't work very well with >1G devices. (only partitions that are under 1G mount properly)

Easy workaround: use PFS3ds (PFS3 with direct scsi). It seems to work fine, at least on CDTV. Tested with 4G CF card on SCSI-IDE bridge.

(CDTV scsi.device is slightly modified 6.x version and also has >1G problem)

hello,

It's possible to repost the rom on the Zone! ????? thanks in advance.

another request to place the rom image in the zone again. Trying to setup an A500/A590 WinUAE config.

Thanks

It's in the zone.

Thank you :)

A2091/A590 Boot Rom
 

Hi Guys
Have tried downloading the zip file but keep being told it's empty when trying to uncompress. Any chase you could pls reupload, again it's for a WinUAE config.

Many thanks in advance

IE is buggy, use Firefox, Opera or something else to download then it should work.

cheers duke

The archive works for me in WinRAR.

Got it now using opera but WinUAE still refuses to recognise the Roms when performing the rom scan

"Not doing something" still isn't acceptable bug report. Please try again :)


As was explained in other thread, web server sends it gzipped and IE has issues with "double" compressed files.

Hi Toni,

Here's a bit more depth, I downloaded the file from the zone using Opera on WinXP then uncompressed using WinRar to produce the 2 8K Rom files.
Dropping them into my "Roms" folder for WinUAE (after changing the names to include .ROM ext) and running Rom Scan a get a report back stating 2091/590 SCSI Rom unavailable.

Appreciate the help