Transcend 4gb 133x Ultra Speed CF Card in PCMCIA?
 

Can anyone tell me if this card works correctly in a PCMCIA Adaptor in the Amiga?

In the compatability thread it was confirmed working with CF-IDE i believe, but noone had tried it via PCMCIA.

Thanks.

I think you're best to stick to <2gb for PCMCIA

I have this trancend card in my A1200 but sadly I've not tested it PCMCIA.

Steve.

I have had few problems with Transcend cards in IDE as well as in PCMCIA, so I would avoid it and buy SanDisk.

And Amiga 600 have a bit different PCMCIA that A1200, so the probability of incompatibility is also higher.

Agreed - I have had mixed results with Trancend - in my opinion - avoid.

Info on PM sorry to confuse thread

I am now lost in this thread...

I have used the transcend 2GB 80x in both pcmcia and ide/cf and they work fine.I have also used 4GB sandisk ultra2 and 4GB transcend 80x in pcmcia and ide and they work well for me. i have not tried the 133x.

Ok thanks, i'll go with a Sandisk most likely, sounds safer.