English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   Hardware mods (http://eab.abime.net/forumdisplay.php?f=105)
-   -   CF Card and HDtoolbox (http://eab.abime.net/showthread.php?t=56130)

source 03 November 2010 06:24

CF Card and HDtoolbox
 
How do you get a compact flash card to be used under HDToolbox. I have a 4 gig Lexar card that when I load HDToolBox, it shows the card on the ide adaptor, but it when it is selected HDToolBox notes that it can't work with it. do you need to switch to fixed type and if so how is that done?
Thanks

mihcael 03 November 2010 07:53

There is an updated hd tools on aminet that should help your problems

Jope 03 November 2010 07:56

Patch your hdtoolbox?

http://home.freeuk.net/markk/Amiga_M...box_patch.html

source 03 November 2010 13:16

These patches only appear to work up to 3.1. Is there a patch for 3.9?

FOL 03 November 2010 14:26

Quote:

Originally Posted by source (Post 712603)
These patches only appear to work up to 3.1. Is there a patch for 3.9?

BB2 toolbox, should work fine.

cpiac64 03 November 2010 14:47

remove protection on floppy and save new parameter then partition the cf

Jope 03 November 2010 23:10

I always change drive definitions into ram:drive definitions.. It's pointless to store the info for drives that can report it themselves.

FOL 04 November 2010 02:13

Quote:

Originally Posted by Jope (Post 712708)
I always change drive definitions into ram:drive definitions.. It's pointless to store the info for drives that can report it themselves.

Agreed.


All times are GMT +2. The time now is 20:10.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.

Page generated in 0.04119 seconds with 11 queries