English Amiga Board - Is my CyberVision 64/3D running in ZII mode?

English Amiga Board (https://eab.abime.net/index.php)

- support.Hardware (https://eab.abime.net/forumdisplay.php?f=20)

- - Is my CyberVision 64/3D running in ZII mode? (https://eab.abime.net/showthread.php?t=85007)

nogginthenog

03 December 2016 13:54

Is my CyberVision 64/3D running in ZII mode?

http://amiga.resource.cx/exp/cybervision643d lists:

Code:

Amiga         Interface  Autoconfig ID

A2000         Zorro II   8512 / 67

A3000, A4000  Zorro III  8512 / 50

WhichAmiga returns:

Code:

8512/67: Phase 5 Digital Products CyberVision 64/3D (@$50000000 256M)

Early boot menu & sysinfo both show 8512/67.
I have an A4000. Is my CV64/3D running ZII mode? The 256M suggests not, so why is it showing 67?

Locutus

03 December 2016 19:11

Amiga.resource.cx might be wrong, a 256M boardsize would definitely indicate its Z3.

Kin Hell

04 December 2016 14:47

Page 28 of the Manual mentions 8512-67 which should be visible from the Expansion Board screen in the Early Startup Menu.

The manual makes no reference to 8512-50 for A3000/4000 miggys, as far as I can see.

nogginthenog

04 December 2016 18:27

Thanks guys. I'm starting to think Amiga.resource.cx is wrong. The Linux & BSD kernel sources only refers to 8512/67.

All times are GMT +2. The time now is 13:10.

Page generated in 0.04057 seconds with 11 queries