2nd HD FDD On Amiga 4000
Hi
I currently have 1 HD FDD in place in my Amiga 4000. I was wondering whether it would be possible to add a 2nd HD FDD into my Amiga 4000 without the use of hardware hacks (ie Catwiesel). The FDD cable i have has 2 ends at one end of the cable so would i just connect the 2nd HD FDD top that and just change the jumper settings so the Amiga recognises that one as DF1:? Many thanks in adanced. Regards |
It certainly is... I have 2 HD drives in my A4000 and yes, the second one is DF1: :)
|
Hi
Thanks for the reply. Did you have to use additional hardware? Or do use a normal fdd cable with 2 ends and change the jumper settings on the back on the fdd? |
No additional hardware - just used the floppy cable that was already in my A4000. I do remember tweaking jumpers to get it working, but it wasn't difficult. It was a while ago now and I can't remember what they were.
I used http://www.amiga-hardware.com for reference. |
Quote:
Where abouts on that site is it? I looked on there, couldn't find anything. I am a dumbey! :) Regards |
:) Amiga Models->Commodore A4000
Just the motherboard jumper information. |
Oh yes i see. Where are the jumpers located on the motherboard then? I haven't got mine yet but will look when i get it back!
Regards |
They are dotted all around the board, but they are labelled - so you shouldn't have a problem. If you get stuck post back with some pics and we'll do our best to help you out :)
|
Cool thanks for that! :) In the words of Arnie: "i'll be back!"
|
Where did you get the HD drive from? I can only get hold of incompatible PC drives, such as the dang Sony :(
|
I think I got it from either PowerComputing or Eyetech... both of which are now closed :(
SoftHut.com have some A4000 drives at $95 each... wooo! :D |
While it seems steep, exchange rate is excellent at the moment- around $2 - £1 so it isnt just as bad.....
|
ok i got the hd fdd. it already had df1: jumpers at the back. i didn't do anything to the mobo jumpers and it seems to recognise it as an hd df1 so problem solved! :)
|
Mobo jumpers only need to be set for dd drives or modified pc hd drives.
|
All times are GMT +2. The time now is 19:22. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.