English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.WinUAE (http://eab.abime.net/forumdisplay.php?f=5)
-   -   Kryoflux Stream Support (http://eab.abime.net/showthread.php?t=101399)

Giants 23 March 2020 22:05

Kryoflux Stream Support
Hi !

WinUae does'nt support 'RAW FLUX STREAM', so in multiples Stream File in .RAW ?

It's crash when I try to use the first
ex : Track Dump_00.0.raw

Toni Wilen 25 March 2020 19:35

Not enough information. Can't say anything without those files..

Tomislav 26 March 2020 12:26

I think that you can convert raw stream to other format with Kryofluks tools.

Looks like SPS Decode Library (CAPSImg.dll) still don't support raw stream, at least one from 2014. That is used usually with WinUAE.

There are two CAPSImg.dll libraries and both are same version (, but different files. In spsdeclib_5.1_windows_binary.zip is from year 2014 and in kryoflux_3.00_windows.zip is from 2017. Both archives are on Kryoflux download page.

Jope 26 March 2020 12:37

You can use HXC tools to convert the streams. dtc also will convert them to any format it supports, but of course copy protections will fail..

Retroplay 26 March 2020 13:46

Yes, just use DTC to convert stream files to CT RAW then you can use them in WinUAE.

Giants 29 April 2020 13:29

Configuration :
Windows 10 - 64B // 32G Ram
WinUAE V4.3.0 (2019.12.19) 64-Bit
Installation Directory : C:\Program Files\WinUAE\

I already tried ALL CAPSImg.dll available on https://www.kryoflux.com/?page=download
CAPSImg.dll copy to C:\Program Files\WinUAE\ and C:\Windows\System32\ Directorys

I have no problem to lauch IPF or ADF file BUT, WinUAE don't work with all my flux file (I say ALL and I have a lot)

WinUAE Configuration (A500 Standard)
Approximate A500 or Cycle-exact
OCS Chipset
Cycle-exact (full)
KS ROM V1.3 (A500, A1000, A20200) rev 34.5 (256k) [315093-02]
512 Chip

This configuration work with ALL my files (ADF and IPF), but don't work with all kryoflux files
ak (160 files of flux : ex : 00.0.raw, 00.1.raw, 01.0.raw etc)

ALL this flux work (tested on real A500, I'm 100% sure)

Workflow :
(1) Start WinUAE
(2) Select Configuration panel and select A500 (configuration Shown above) / Double Click
(2b) WinUae Start in a Window
(3) Press F12, enter in the WinUAE Menu, select floppy Drive panel and select file for DF0
(3b) : ex : D:\Dump\0068_Jim_Power_Amiga_D1\00.0.raw
(4) Click Ok to retrun to the WinUAE Windows Emulation
(5) it Start.... but....no boot, I stay in the Kickstart 1.3 Floppy picture.
(6) Press F12, Enter in the WinuAE menu, choice another disk, whatever ADF, IPF, game, demo, tools
(7) return to the WinUae Emulation Windows, it's booting and work

WinUAE seem don't understand it's the first Flux File (ak 00.0.raw)

And I don't want to convert my fluxs :)
So Don't support ?
And I don't see the extension in choices.


Tomislav 02 May 2020 20:28

I think that stream is still not supported by CAPSImg.dll.

6 years ago was written in kryoflux forum https://forum.kryoflux.com/viewtopic.php?t=205&start=20:

"- with new capsimg.dll you can now directly load CT raw (stream coming soon) images in emulators, e.g. WinUAE, FS-UAE, Hatari, STEem, Spectaculator and many more."

Giants 16 May 2020 13:29

Thks Tomislav.
Tis explains that.
Maybe one day :)

Tomislav 17 May 2020 12:16

You're welcome!

All times are GMT +2. The time now is 09:13.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.

Page generated in 0.04293 seconds with 11 queries