Compact Flash Card Prep on Mac
Probably a question that’s been answered but I can’t find any info in relation to setting us a CF card on a Mac for using with a real Amiga.
I’ve seen many winuae tutorials using disk part in the command line, however I don’t have a pc and wondered if anyone has a easy guide to wiping the CF card and selecting in on fs-uae as a hard drive so that I can create a personalised system. Any help would be appreciated. |
To wipe it and set it up as a hard drive (make sure you have backups, I take no responsibility for any issues etc etc):
Insert the card, load Disk Utility and remove any partitions that are on it Load Terminal and type "diskutil list" You will see your CF card called something like /dev/disk3 - MAKE SURE YOU IDENTIFY IT CORRECTLY Type "sudo chmod 777 /dev/diskx" (x being whatever number your CF card is) - your disk will be read only in FS-UAE if you dont do this Load your FS-UAE configuration file in Textedit and edit the file: hard_drive_0 = /dev/diskx hard_drive_0_type = rdb Save the file, open it in FS-UAE, and you can now attach your Workbench floppies, boot from the Install disk and set up Workbench as usual (remember to start HDtoolbox with the uaehf.device tooltype and to change the Maxtransfer setting). |
Quote:
Many thanks for that, it’s been driving me mad ha ha. I’ll give it a try in the morning. Appreciate the help |
Quote:
Works like a charm. Thank you for your help. Much appreciated [emoji106][emoji16] |
I use rdbtool and xdftool from https://github.com/cnvogelg/amitools
to build my customised CF card. I then test this in FS-UAE like lilwshu describe above, and then later when I know eveything is like I want it, in my real Amiga. I have made a script to build the contents exactly like I want them. It works great if you are comfortable with command line tools and scripts. And you get a reproducible process for creating the CF card contents. |
Quote:
Thanks for that. I’ll have a look at it. I’m ok with the command line/terminal. Not great with other scripts. That’s cool you’ve written a script to help. Maybe something I should look into. How did you do yours? Sent from my iPad using Tapatalk |
Sure I use a script like below.
For inspiration only, no warranties :laughing I have very much enjoyed making my own perfect Amiga CF card, setup with Demos, WHDLoad Games, my favorite mods and iff pictures. I guess perfect is different for everyone :spin Make sure you use the correct /dev/diskX, my CF card is at /dev/disk2 for example. Using wrong device here can wipe you disk. Code:
#!/bin/sh |
Quote:
Ha ha. Appreciate that. I like to customise mine too, that’s the beauty of the Amiga isn’t it. Thanks for the script, gives me an idea where to start lol Sent from my iPad using Tapatalk |
Thanks for this great script! This makes many things easier
|
Hey @bni
I get the FileSystem not installed: Code:
# Build AmigaOS Code:
creating: 'DH0' (1, 3200) DOS3 EDIT: Found issue byself |
Adding the FFS into the rdb on the CF card can possibly be omitted altogether. The reason to do that is so older Kickstarts can load it and use new features that only exists in 3.1.4, like DOS7.
But I never got this to work. My real A1200 has 3.0 ROM and I use MapRom on accelerator card to load the 3.1.4 ROM. This is why I left the AmigaOS partition as DOS3, with DOS7 it didn't work for some reason. |
Could be to do with the different scsi.device maybe
|
A convenient way to put stuff inside the Startup-Sequence is to patch it in like this with ex.
In this example below I patch it to load a newer kickstart with MapRom and also run a NoClick exe to prevent the floppy clicking on my A1200 Code:
# Patch Startup-Sequence |
Hi, ive done this and successfully mounted and formatted the CF card in FS UAE and coppied data to the card in Amiga OS3.2
Ive now ejected it and the card dev/disk3 is not found by FSUAE I can see in in Mac Terminal /dev/disk3 (external, physical): #: TYPE NAME SIZE IDENTIFIER 0: *16.0 GB disk3 |
By default it has restrictive permissions, I need to do:
sudo chmod 777 /dev/disk4 Before FS-UAE can access it. Need to do this every time card is inserted. |
All times are GMT +2. The time now is 18:26. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.