English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.Apps (http://eab.abime.net/forumdisplay.php?f=8)
-   -   Virus Z - error messages under AmigaOS 3.2.1 with RTG (http://eab.abime.net/showthread.php?t=110859)

SID-6581 06 June 2022 13:41

Virus Z - error messages under AmigaOS 3.2.1 with RTG
 
4 Attachment(s)
Hello, I installed the latest VirusZ version with the latest version of the xvs.library and the boot block protection on three systems. On two systems I get error messages when starting VirusZ. AmigaOS 3.2.1 is installed on all systems.


1. Everything works fine on my Amiga 1200 with ACA 1231/41MHz turbo card.


2. On my Raspberry Pi 4 with amiberry 5.2 and activated RTG with the P96 driver V 3.3.0 I get an error message after starting VirusZ (see picture 1). After I clicked OK, an error report comes up (see picture 2).


3. On my Turbo Chameleon 64 with the MinimigAGACore and activated RTG with the P96 driver V 3.3.0 I get an error message after starting VirusZ (see imgage 3). After I click OK, an error report comes up (see picture 4).


Could it be that VirusZ has problems with the P96 driver V3.3.0?


Cheers
SID-6581


P.S: Thank you for your fantastic work Jan-VHT :-)

zipper 06 June 2022 14:20

Got those with my 3.1 060 RTG system and happily ignored them.

StingRay 06 June 2022 14:43

Quote:

Originally Posted by SID-6581 (Post 1548828)
Could it be that VirusZ has problems with the P96 driver V3.3.0?

VirusZ has no problems with P96, it just reports that system vectors have been changed. And these changes were done by the P96 driver as for RTG on Amiga, certain system functions have to be patched.
In short: you don't have to worry about these messages reported by VirusZ, these patches are harmless and required.

SID-6581 07 June 2022 10:49

Thanks for the information. Thankfully, VirusZ continues to evolve, as does the xvs.library.

https://vht-dk.dk/amiga/xvs/xvs.htm

So wouldn't it make sense for a future VirusZ version to recognize the patch actions of the P96 driver as harmless and no longer issue a warning message?


All times are GMT +2. The time now is 17:48.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.

Page generated in 0.04382 seconds with 11 queries