English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.Hardware (http://eab.abime.net/forumdisplay.php?f=20)
-   -   Indivision ECS Flashes Through Screen Under WB1.3, Fine Under 3.1 (http://eab.abime.net/showthread.php?t=70595)

Loedown 01 September 2013 02:00

Indivision ECS Flashes Through Screen Under WB1.3, Fine Under 3.1
 
As the title reads, I get flashes through the picture in WB1.3 but fine under 3.1

On an A2000 with a stock PSU which has 22mV ripple on +5V, connecting the grounding pad to the board makes no difference and the core is flashed to 1.01

Anyone had any similar issues?

Loedown 02 September 2013 14:30

If anyone's had even similar issues or anything to do with flickering I would like to know. Seems that when the config tool is being used under 3.1 then it flashes the same way as it does under 1.3

FOL 02 September 2013 15:01

Quote:

Originally Posted by Loedown (Post 908209)
If anyone's had even similar issues or anything to do with flickering I would like to know. Seems that when the config tool is being used under 3.1 then it flashes the same way as it does under 1.3

You haven't answered my questions. I would be able to tell for sure, if Im given the information I have asked for.

Loedown 02 September 2013 15:34

Seems it's a secondary part of a fix that hasn't been applied, many thanks to FOL for pointing this out and sending me information on how to modify the board.


All times are GMT +2. The time now is 10:39.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.

Page generated in 0.03834 seconds with 11 queries