English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.Amiga Forever (http://eab.abime.net/forumdisplay.php?f=109)
-   -   Midi and Bars & Pipes and presentation (http://eab.abime.net/showthread.php?t=93262)

Gustau 05 July 2018 09:36

Midi and Bars & Pipes and presentation
 
First, Hi to everybody this is my first post.
I have Amiga forever software and I can run Bars & Pipes. The problem is I can't upload to the tool box the Midi In and Out tools. Don't know to do because I followed exactly this instructions https://www.amigaforever.com/kb/13-107 and seems workbench doesn't recognize...
I have a Tascam us 122mkII and it appears correctly on the tool options
Any help?
Thanks

(also Amiga 1200 owner from the early 90´s):help

golem 15 July 2018 19:42

I seem to remember you have to download the CAMD MIDI In \ Out tools to get Bars and Pipes to work with WinUAE. You can get these from Alfred Faust's site. There is a user ral-klan on Amiga.org who knows a lot about what you are trying to do. That website is being upgraded at the moment (it may be a few weeks before it is back). Maybe ask on there when it comes back up.


All times are GMT +2. The time now is 06:40.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.

Page generated in 0.03884 seconds with 11 queries