English Amiga Board

English Amiga Board (http://eab.abime.net/index.php)
-   support.Hardware (http://eab.abime.net/forumdisplay.php?f=20)
-   -   Quantum GO Drive (http://eab.abime.net/showthread.php?t=5476)

Mick_AKA 14 July 2002 23:41

Quantum GO Drive
I have rescently ressurected my A1200 and decided that i would try to fit my 120mb 2.5" Quantum GO Drive into it. The drive fits in fine, and when i turn on the Amiga the drive bursts into life. Unfortunately HDInstTool - Harddisk Installation Tool will not detect the drive!

I have the Drive set to Single, not Slave or Cable Select

The drive worked fine in my laptop before removed and as far as I know still has windows 3.11 installed on it.

Can anyone help me to get this drive working?

Please help! Any suggestions are greatly appreciated.

RetroMan 14 July 2002 23:50

Remove all Jumpers and try again, on some IDE drive this is like magic :) Else try CABLE SELECT ! This is really difficult, some of my older IDE HD´s only boot up with no Jumper at all, some only boot up when jumpered as Master other with Cable Select :confused

All times are GMT +2. The time now is 13:51.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.

Page generated in 0.03957 seconds with 11 queries