WrapEngine 4040 + Micronik z-3i rev 6.7 , do they work together?
A friend on amigahellas.gr has the above combo in his A1200T , a WrapEngine 4040 and a Micronik z-3i rev 6.7 busboard... the 4040 with the z-3i just won't boot.
He tested the 4040 on an A4000 and it boots fine... is there a jumper or something on the z3-i? anyone tried the above combo? he aslo tried to disable scsi on both z-3i and wrapengine, and also disabled mmu but none helped... thanks! :great |
What's a wrapengine? ;)
|
I thought he meant a wurpengine :D
|
3 Attachment(s)
@keropi-san
heres some resources for you Amigo (a big thanks to Amigo-lopos :D) i hope they help m8y :) [edit] I have included the jumper configuration need for accelerators. |
I will inform the person in need Z , thanks! :great
|
hello,
for me the accelerator don't work with micronik bus. be carefull to not damage the hardware !!!. The scsi never work here (years ago) and verry slow if work. I have years ago this hardware micronik1 tower (but no warpengine). work with 1230+scsikit+PIV+video option for the SD/FF. the problem is the bus with verry slow gfx transfer. much better with elbox products. I'm honestly verry curious to know if that work !! :-) |
All times are GMT +2. The time now is 07:33. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.