Commodore 1084/1084S RGB connector pinout

8bitbubsy · 12 November 2009, 19:21

Here you go, I made this now.. Great if you want to make an e.g. game console RGB cable or something!

Keep in mind that this picture is illustrating the connector plug you're making, not the plug on the monitor!

If you get blended colors, then you need to buffer the current of the RGB lines.
I use 3x 6.3v 100µF capacitors... The - side should go to the pins, and the + side to the wires.
For me, the RGB lines measured 2.x to 3.x volt, so I'm safe with 6.3v caps.

If you get heavy distortion and/or funky colors, then you presumably forgot to wire up GND/ground...
Get your GND from your console/machine video output plug, and solder it to pin 1 on your own nifty plug.

duddyroar · 25 February 2011, 17:08

No image showing for me?

8bitbubsy · 25 February 2011, 17:45

Fixed

12 November 2009, 19:21	#1
8bitbubsy ProTracker Nerd Join Date: Sep 2009 Location: Norway Age: 23 Posts: 1,128	Commodore 1084/1084S RGB connector pinout Here you go, I made this now.. Great if you want to make an e.g. game console RGB cable or something! Keep in mind that this picture is illustrating the connector plug you're making, not the plug on the monitor! If you get blended colors, then you need to buffer the current of the RGB lines. I use 3x 6.3v 100µF capacitors... The - side should go to the pins, and the + side to the wires. For me, the RGB lines measured 2.x to 3.x volt, so I'm safe with 6.3v caps. If you get heavy distortion and/or funky colors, then you presumably forgot to wire up GND/ground... Get your GND from your console/machine video output plug, and solder it to pin 1 on your own nifty plug. Last edited by 8bitbubsy; 25 February 2011 at 17:46.

25 February 2011, 17:45	#3
8bitbubsy ProTracker Nerd Join Date: Sep 2009 Location: Norway Age: 23 Posts: 1,128	Fixed __________________ Amiga 4000 rev B [040 25MHz - 16MB fast RAM - 2MB chip RAM - kick 3.1 - Picasso IV] Amiga 2000 rev 4.5 [030 25MHz - 8MB fast RAM - 2MB chip RAM - kick 3.1] Amiga 1200 rev 2B [030 50MHz - 16MB fast RAM - 2MB chip RAM - kick 3.1]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PC to 1084 : RGB or S-Video?	Andymiga	support.Hardware	28	14 October 2012 17:05
A530 power supply connector pinout	SpookyAmiga	support.Hardware	3	09 September 2009 05:17
WTB: rgb to 1084 monitor lead	DoogUK	MarketPlace	6	07 February 2009 16:26
1084S-D1,no blue through analogue RGB	dosucol	support.Hardware	10	09 January 2009 00:17
WTB: 1084 RGB cable (old round type)	T_hairy_bootson	MarketPlace	7	23 November 2005 00:45

25 February 2011, 17:08	#2
duddyroar Registered User Join Date: Feb 2011 Location: Loughborough, United Kingdom Posts: 16	No image showing for me?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

AdSense
Advertisement: