Schematics Collection!

Zetr0 · 09 June 2007, 18:51

so heres my collection of schematics and drawings i have posted thus far.

[Edit: Everyone else is free to post any handy schematics they've drawn here, but please keep discussion to a minimum! -Jope]

all the schematics I post here are all available from here

http://www.guildserver.co.uk/project...?g2_itemId=734

kickrom switcher - (click to enlarge)

[new] : Switch Bank (click to enlarge)

*I designed this with Smiley from existing plans on aminet, doulbe check first before use guys.*

------------------

CF -> IDE mounting guide.

an idea inspired by Electroblaster in a convo about external cf hdd encasing...

------------------

A500 Keyboard Mod

p1. the motherboard port

p2. the keyboard cable

p3. cant remeber the reason for this bit lol

I think I put these schematics together for fingers for a mod we were discussing.

[edit] I just remembered, this mod would allow you to plug this into a 5pin DIN port and still be able to keep the A500 as a keyboard including the LED's!
------------------

A1200 Mouse port

Heres the pinout for the A1200 mouse port, this came about as there was a specific mobo revision and some one needed a cable.

------------------

Micronic Power adapter

this came about with the help of lopos2000, whom scaned me a manual! cheers m8y

-------------------

Joystick / Mouse manual switcher

for my m8 Fingerz who had a cool idea on putting on more ports to the front of his a600 / a500 mod

[edit: I suggest using a dual switch here and toggling both +5V and GND between the connectors. When swapping between two joysticks, GND is sufficient, but if you want to swap between a mouse and joystick, the +5V is critical, as the mouse will pull some lines up / down when powered. -Jope]

------------------

and of course theres freds shirt!

http://www.guildserver.co.uk/tempfiles/fredshirt.jpg

why no one commented on this i will never know... its hillarious!
------------------

you can configure and wire up the a500 in the same manner as the 1200 or 600. so heres how under an atx psu

and here the regular fitting

------------------

heres a pinout from the AT - PSU (P8 / P9) connectors... i figure it should be easy to extrapolate the required configuration from the two schematics

Paul_s · 23 June 2007, 17:35

legend

top stuff there chap

Zetr0 · 24 June 2007, 02:06

@Paul_s
Thanks m8y and heres a couple more

heres a simple mod wire diagram for PSU

and the pinout for the Micronik Amiga -> AT keyboard adapter REV.2.1

(click to enlarge)

lopos2000 · 24 June 2007, 18:06

@Zetr0
Excellent stuff Zetr0. Like your drawings.

Zetr0 · 11 July 2007, 02:08

@Lopos2000

Thanks my friend

I have about a dozen more to add after I have finnished my current project LOL and THEN i start on an internal mod for a midi-synthesizer *thanks to DDNI*

OddbOd · 11 July 2007, 12:38

These would be a great addition to the wiki plus I'm sure the folks over at GameSX would be interested in a copy as well.

Zetr0 · 12 July 2007, 01:55

welcome to have them oddbod

heres another one i made for my a600+ project *i actualy decoupled the ports and then rewired my own using this simple mixer. its nice to listern to CD's on the A600 *James Brown all the way!* lol (and yes before you ask, i was playing along in Medstudio... kinda lol)

as a personal note (i really need to take more pictures of the re-modding i have dont to that... lol)

heres a simple internal Audio Mixer for the A600 / A1200

(click to enlarge)

Dizzy · 12 July 2007, 02:30

nice collection

Could you maybe downscale the pictures, so they where smaller in the thread, and so you could get them normal size by clicking on them. THat would make it easier to look at and get a more usefull overview

Zetr0 · 12 July 2007, 02:57

is there a way i can limmit the size in the'[img]' tag? if so i will re-do the lot

Zetr0 · 13 July 2007, 01:15

heys all, updated links with thumb-anchors for big images!

(thanks eLowar!)

Dizzy · 13 July 2007, 01:20

cool

wow makes the thread easier to read

demoniac · 14 July 2007, 00:21

Interesting mods!

Fingerlickin_B · 15 April 2008, 12:36

I keep getting a failure when trying to open the remotely-hosted pics...but for sure I'll be saving these man...this stuff is gold!

PZ.

p.s. Just as a larf...the error number is 500

p.p.s Can't open AmiBay either, so it must be a guildserver.co.uk issue. I'll try again tomorrow night

Zetr0 · 15 April 2008, 12:55

it should be back up later but theres a server issue at pressent

Fingerlickin_B · 15 April 2008, 13:00

Quote:

Originally Posted by Zetr0

it should be back up later but theres a server issue at pressent

I can't complain...you are the one helping us!

PZ.

Shoonay · 15 April 2008, 13:02

Quote:

Originally Posted by Zetr0

it should be back up later but theres a server issue at pressent

What's going on, you guys? It's "that time of year" or something?

First Total-Emu disappears (is back now), now it's UndergroundGamer...

Zetr0 · 15 April 2008, 13:03

I have an absolute ton of schematics upload and update this thread with LOL

i must go bug my host provider.... support tickets comming right up!!!

Shoonay · 15 April 2008, 13:13

Quote:

Originally Posted by Zetr0

i must go bug my host provider...

You go ahead Z, and bitchslap him for me too!

coze · 15 April 2008, 13:59

one schematic from me (actually only a pinout) keyboard pinout for rev2B a1200 mobos. You can connect an Amiga keyboard directly (no need for PLLC socket)

Zetr0 · 15 April 2008, 15:02

OOoo coolies

09 June 2007, 18:51	#1
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 38 Posts: 9,185	Schematics Collection! so heres my collection of schematics and drawings i have posted thus far. [Edit: Everyone else is free to post any handy schematics they've drawn here, but please keep discussion to a minimum! -Jope] all the schematics I post here are all available from here http://www.guildserver.co.uk/project...?g2_itemId=734 kickrom switcher - (click to enlarge) [new] : Switch Bank (click to enlarge) I designed this with Smiley from existing plans on aminet, doulbe check first before use guys. ------------------ CF -> IDE mounting guide. an idea inspired by Electroblaster in a convo about external cf hdd encasing... ------------------ A500 Keyboard Mod p1. the motherboard port p2. the keyboard cable p3. cant remeber the reason for this bit lol I think I put these schematics together for fingers for a mod we were discussing. [edit] I just remembered, this mod would allow you to plug this into a 5pin DIN port and still be able to keep the A500 as a keyboard including the LED's! ------------------ A1200 Mouse port Heres the pinout for the A1200 mouse port, this came about as there was a specific mobo revision and some one needed a cable. ------------------ Micronic Power adapter this came about with the help of lopos2000, whom scaned me a manual! cheers m8y ------------------- Joystick / Mouse manual switcher for my m8 Fingerz who had a cool idea on putting on more ports to the front of his a600 / a500 mod [edit: I suggest using a dual switch here and toggling both +5V and GND between the connectors. When swapping between two joysticks, GND is sufficient, but if you want to swap between a mouse and joystick, the +5V is critical, as the mouse will pull some lines up / down when powered. -Jope] ------------------ and of course theres freds shirt! http://www.guildserver.co.uk/tempfiles/fredshirt.jpg why no one commented on this i will never know... its hillarious! ------------------ you can configure and wire up the a500 in the same manner as the 1200 or 600. so heres how under an atx psu and here the regular fitting ------------------ heres a pinout from the AT - PSU (P8 / P9) connectors... i figure it should be easy to extrapolate the required configuration from the two schematics Last edited by Zetr0; 13 July 2007 at 01:14.

23 June 2007, 17:35	#2
Paul_s Stuck in 1985 Join Date: Nov 2006 Location: Amigaville Age: 35 Posts: 2,846	legend top stuff there chap __________________ Memotech MX512 with optional Kelly LeBrock barbie doll generator...

24 June 2007, 02:06	#3
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 38 Posts: 9,185	@Paul_s Thanks m8y and heres a couple more heres a simple mod wire diagram for PSU and the pinout for the Micronik Amiga -> AT keyboard adapter REV.2.1 (click to enlarge) Last edited by Zetr0; 13 July 2007 at 01:09.

12 July 2007, 01:55	#7
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 38 Posts: 9,185	welcome to have them oddbod heres another one i made for my a600+ project i actualy decoupled the ports and then rewired my own using this simple mixer. its nice to listern to CD's on the A600 James Brown all the way!* lol (and yes before you ask, i was playing along in Medstudio... kinda lol) as a personal note (i really need to take more pictures of the re-modding i have dont to that... lol) heres a simple internal Audio Mixer for the A600 / A1200 (click to enlarge) Last edited by Zetr0; 13 July 2007 at 01:13.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A disk from 17 BIT COLLECTION or PD SOFT COLLECTION	yurifox	request.Apps	5	17 April 2007 05:40
A590 Schematics or service manual	GazSP	request.Other	4	18 February 2007 20:43
Wanted >> Amiga Virus Free PD Collection & Fred Fish Collection	Kitty	request.Demos	34	06 January 2006 20:30
Schematics wanted	Ironman	support.Hardware	4	09 September 2004 21:43
[req] A1000 PCB schematics	Akira	support.Hardware	2	01 November 2001 15:35

24 June 2007, 18:06	#4
lopos2000 Zone Friend Join Date: Apr 2005 Location: Cider is best In The West Posts: 1,238	@Zetr0 Excellent stuff Zetr0. Like your drawings.

11 July 2007, 02:08	#5
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 38 Posts: 9,185	@Lopos2000 Thanks my friend I have about a dozen more to add after I have finnished my current project LOL and THEN i start on an internal mod for a midi-synthesizer thanks to DDNI

11 July 2007, 12:38	#6
OddbOd Registered User Join Date: Jul 2005 Location: Australia Age: 36 Posts: 625	These would be a great addition to the wiki plus I'm sure the folks over at GameSX would be interested in a copy as well.

12 July 2007, 02:30	#8
Dizzy DEAD Join Date: Jan 2002 Location: . Posts: 3,399	nice collection Could you maybe downscale the pictures, so they where smaller in the thread, and so you could get them normal size by clicking on them. THat would make it easier to look at and get a more usefull overview

12 July 2007, 02:57	#9
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 38 Posts: 9,185	is there a way i can limmit the size in the'[img]' tag? if so i will re-do the lot

13 July 2007, 01:15	#10
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 38 Posts: 9,185	heys all, updated links with thumb-anchors for big images! (thanks eLowar!)

13 July 2007, 01:20	#11
Dizzy DEAD Join Date: Jan 2002 Location: . Posts: 3,399	cool wow makes the thread easier to read

14 July 2007, 00:21	#12
demoniac Registered User Join Date: Jul 2005 Location: - Posts: 1,122	Interesting mods!

15 April 2008, 12:36	#13
Fingerlickin_B Amiga Nut Join Date: Oct 2006 Location: Belco, Australia Posts: 2,116	I keep getting a failure when trying to open the remotely-hosted pics...but for sure I'll be saving these man...this stuff is gold! PZ. p.s. Just as a larf...the error number is 500 p.p.s Can't open AmiBay either, so it must be a guildserver.co.uk issue. I'll try again tomorrow night

15 April 2008, 12:55	#14
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 38 Posts: 9,185	it should be back up later but theres a server issue at pressent

AdSense
Advertisement:

AdSense
Advertisement:

AdSense
Advertisement:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

15 April 2008, 13:03	#17
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 38 Posts: 9,185	I have an absolute ton of schematics upload and update this thread with LOL i must go bug my host provider.... support tickets comming right up!!!

15 April 2008, 13:59	#19
coze hastala vista winny vista Join Date: Feb 2006 Location: mt fuji Age: 35 Posts: 1,333	one schematic from me (actually only a pinout) keyboard pinout for rev2B a1200 mobos. You can connect an Amiga keyboard directly (no need for PLLC socket)

15 April 2008, 15:02	#20
Zetr0 Ya' like it Retr0? Join Date: Jul 2005 Location: United Kingdom Age: 38 Posts: 9,185	OOoo coolies