View Full Version : WrapEngine 4040 + Micronik z-3i rev 6.7 , do they work together?
15 August 2007, 17:18
A friend on amigahellas.gr has the above combo in his A1200T , a WrapEngine 4040 and a Micronik z-3i rev 6.7 busboard... the 4040 with the z-3i just won't boot.
He tested the 4040 on an A4000 and it boots fine... is there a jumper or something on the z3-i? anyone tried the above combo? he aslo tried to disable scsi on both z-3i and wrapengine, and also disabled mmu but none helped...
15 August 2007, 18:43
What's a wrapengine? ;)
15 August 2007, 19:24
I thought he meant a wurpengine :D
15 August 2007, 20:14
heres some resources for you Amigo
(a big thanks to Amigo-lopos :D)
i hope they help m8y :)
I have included the jumper configuration need for accelerators.
15 August 2007, 20:58
I will inform the person in need Z , thanks! :great
16 August 2007, 15:18
for me the accelerator don't work with micronik bus. be carefull to not damage the hardware !!!.
The scsi never work here (years ago) and verry slow if work.
I have years ago this hardware micronik1 tower (but no warpengine). work with 1230+scsikit+PIV+video option for the SD/FF.
the problem is the bus with verry slow gfx transfer. much better with elbox products.
I'm honestly verry curious to know if that work !! :-)
vBulletin® v3.7.0, Copyright ©2000-2013, Jelsoft Enterprises Ltd.